4 bolt flange for sale, brand-new and used.

NEW NO BOX this was purchased directly from SMC, it is not surplus = ) SMC GUIDE CYLINDER. THIS WAS PURCHASED DIRECTLY FROM SMC, NOT SURPLUS; CUSTOMER CANCELLATION. BELOW YOU WILL FIND GENERAL INFORMATION ABOUT THIS CYLINDER.

NEW STOCKHAM 6" FLANGED SWING ARM CHECK VALVE BRONZE TRIM

Black Neoprene Rubber **Flange Ring Gasket** with 8 Bolt Holes 5 1/4"OD X4.7/8" shipping applies to 48 states

WELCOME TO RIVERCITY INDUSTRIAL SUPPLY! PHONE: 763 789 BOLT (2658) FAX: 763 789 NUTS (6887) For more fasteners please view my other items. THIS AUCTION IS FOR THE FOLLOWING SERRATED FLANGE LOCK NUTS ZINC FINISH: 25 OF 1/4-20 25 OF 5/16-18

Ecolab / Ace Pump Corp water pump model ECL-10, ECL-9, serial number 36557. Outlet measures 1 1/8 inches to the inside of the threads, inlet measures 1 1/2 inches to the inside of the thread -- I'm not sure if this is the right way to measure it, but I think you can figure it out. Shaft size is 5/8 of an inch and the flange bolt holes measure 4 1/8 inches center to center, in both directions.

New surplus old stock. May have slight shelf wear. 

New surplus old stock. May have slight shelf wear. 

New surplus old stock. May have slight shelf wear. 

New surplus old stock. May have slight shelf wear. 

50 new expansion bolts. 1/4 x 2-1/2 supreme LN use 1/2 drill. flange lock nut.

35 EXPANSION BOLTS. 1/4 X 2-1/2 SUPREME LN. FLANGE LOCK NUTS AND WASHERS.

Item# 4194 - 20" X 60" WEBB GAP BED ENGINE LATHE Equipped With: Swing Up Chuck Guard Hardened and Ground Bed Ways in Good Condition Thread Chasing Dial 12-1/2" Dia. 3-Jaw Chuck with 2-Piece Chuck Jaws with Hard Reversible Top Jaws Hole Thru The Chuck: 4" Chuck Backi

2” 4 Bolt NB Raised Face Slip-on Flange Class 150 Stainless Steel You are bidding on a

New- 4" check valve Eight-bolt pattern flange. Zinc Plated Trim

1 1/4 ” 1500 Weld Neck Flange A/SA182 SCH 80 B16.5 WNRF F316/F316L You are bidding on a

1/2 ” 1500 Weld Neck Flange A182/SA182 SCH 160 B16.5 WNRF F316/F316L You are bidding on a

1/2 ” 400/600 Weld Neck Flange A182 B16.5 WNRF F316/F316L Kerkau You are bidding on a

3” F347/F347H Weld Neck Flange SCH 600 SA 182 B16.5 WNRF You are bidding on a