4 bulkhead fitting for sale, brand-new and used.

This Sale Is For A Laboratory Surplus Lot Of Two Bi-Lok Stainless 1/4" Compression Bulkhead Fittings. This Item Is In Excellent Operational And Great Cosmetic Condition. Buyer To Pay $2.95 For Shipping.

Untitled Document Swagelok® 1/4" Tube OD x 1/4" Tube OD Bulkhead 316 Stainless Steel Instrumentation Grade Manufacture Part No. SS-400-61 Need more at the lowest price on the internet? Click here for the theDoDadman's store.Using the store's search engine, locate the size needed and enter the corresponding parameter for Tube

DC water heating elements 12 volt water heater horse heater stop Cold Weather Colicing dog Colic voltage 24V 24 stock VDC tank 24 cattle 12V waterheater 24v Hot Water 48 volt systems RITCHIE animal Miraco lilspring Miraco livestock

This is a cast bronze, one and a quarter inch male pipe threads on both ends, made to go through a 2 inch hole, with the bulkhead being roughly one quarter inch. The brass has a dark patina from laying around in a small town hardware store before it went out of business and then laid around my place another 10 years. Threaded ends are about 1 5/8th inch male threads (1 1/4 inch NPT)The center threaded section is 2 inches ODI would expect the gasket to measure 2 1/2 OD X 2 ID X 1/8th thick.

Untitled Document DK- Lok® 3/8" Tube OD x 3/8" Tube OD Bulkhead 316 Stainless Steel Instrumentation Grade Swagelok Ref. SS-7500-61 CONDITION REPORT: Brand new out of bag.

MANUFACTURED FROM GLASS RE-INFORCED POLYPROPYLENE FOR STRENGTH AND DURABILITY STANDARD WITH EPDM GASKETS SCHEDULE 80 DESIGN BULKHEAD FITTINGS & GASKETS Description Hole Size Required in Tank for Installation Part Number Item 3/4" Double threaded polypropylene fitting 1 7/16" 60401 A

MANUFACTURED FROM GLASS RE-INFORCED POLYPROPYLENE FOR STRENGTH AND DURABILITY STANDARD WITH EPDM GASKETS SCHEDULE 80 DESIGN BULKHEAD FITTINGS & GASKETS Description Hole Size Required in Tank for Installation Part Number Item 3" Double threaded polypropylene fitting 4 1/2" 62299

MANUFACTURED FROM GLASS RE-INFORCED POLYPROPYLENE FOR STRENGTH AND DURABILITY STANDARD WITH EPDM GASKETS SCHEDULE 80 DESIGN BULKHEAD FITTINGS & GASKETS Description Hole Size Required in Tank for Installation Part Number Item 1" Double threaded polypropylene fitting 2 1/4" 6

MANUFACTURED FROM GLASS RE-INFORCED POLYPROPYLENE FOR STRENGTH AND DURABILITY STANDARD WITH EPDM GASKETS SCHEDULE 80 DESIGN BULKHEAD FITTINGS & GASKETS Description Hole Size Required in Tank for Installation Part Number Item 4" Double threaded polypropylene fitting 5 3/4" 62171

You are bidding on a NEW-Assembly of 9 New CPC check valve fitting with Festo Stainless Steel Bulkhead fitting. Please look at photos. 1)CPC NICKEL PLATED BRASS check valve FITTING 3/8 I.D.

Thank you for looking! You are bidding on 5 pieces of: Push To Connect 1/4" O.D. Bulkhead Union Fitting (Picture shows one fitting, auction is for 5) Specifications: Maximum Pressure 150 PSIG Working temperature: 32 to 140 F

PARKER HANNIFIN 20-24 1 1/4" TO 1 1/2" STAINLESS STEEL HYDRAULIC ELBOW FITTING C40MLOS Originally ordered for a Terex TX51-19M Rough Terrain Fork Lift, these are now surplus. Original purchase price $389 each. PLEASE NOTE that these elbows do not have a tapered hydraulic fitting but a male threaded fitting on the 1.25 inch end and a bulkhead seal on the 1.5 inch end.

MAINLAND VALVE & FITTING, INC. INDUSTRIAL WHOLESALE SUPPLY MAINLAND VALVE & FITTING IS A SURPLUS INDUSTRIAL WHOLESALE SUPPLY COMPANY. MOST MATERIAL OFFERED BY US WILL BE OF AN INDUSTRIAL GRADE.

Item Description: 1x Swagelok SS Bulkhead Fitting Quick Connect Stainless Steel Body 1/8" SS-Q4CShelf Wear but never used.

PARKER HANNIFIN 20-24 1 1/4" TO 1 1/2" STAINLESS STEEL HYDRAULIC ELBOW FITTING C40MLOS Originally ordered for a Terex TX51-19M Rough Terrain Fork Lift with an original purchase price of $389 each. PLEASE NOTE that these elbows do not have a tapered hydraulic fitting but a male threaded fitting on the 1.25 inch end and a bulkhead seal on the 1.5 inch end.

7M45-20D JIC 20 Male x JIC 20 37 BULKHEAD UNION 45 DEGREE FITTING ALUMINUM You are bidding on a 7M45-20D JIC 20 Male x JIC 20 37 BULKHEAD UNION

SS Swagelok Tube Fitting, Reducer, 1/2 in. x 3/4 in. Tube OD SS-810-R-12 This fitting is used but in good shape.

SS Full Flow Quick Connect Stem w/o Valve, 13.0 Cv, 1/2 in. Swagelok Tube Fitting SS-QF8-S-810 This fitting is new and still in package. Free shipping Body Material 316 Stainless Steel Connection 1 Size 1/2 in.

You are bidding on Electronic Parts that we have left as excess from our manufacturing factory. The plastic bin totes are not included. We got all the parts into a box 30"x20"x20" at 75Lbs.