Used 1-3/4 Ponn Conquest 800 fire hose. Tan color, 1-1/2 NH pyrolite couplings, hose tested August 2, 2016---250 psi for 5 minutes, no leaks. Shows use from firefighting.
Used 1-3/4 Ponn Conquest 800 fire hose. Tan color, 100 ft length, 1-1/2 NH pyrolite couplings, hose tested August 2, 2016---250 psi for 5 minutes, no leaks. Shows use from firefighting, Two 100 ft sections available.
New 150 Feet roll of 2" Parker Thoro-Braid Air Hose. 7251. THORO-BRAID® Air Hose - MSHA Series 7251 This hose is designed for the most severe service in mines, quarries and heavy construction.
Continuous Flow Hose Reel (Orignial Wirt Knox Design FD-47 Series) Color is Red see pictures for dims.........Call James @ 281-352-8210 with any questions you may have.....I have an endless supply of these. Note We also carry the heavy duty style for Offshore and Marine use. Holds up to 100 ft of 1 1/2 inch hose.....Contact at James 281-352-8210 Original Wirt & Knox design)
HHR-1.5-100-GALV The heavy duty galvanized hump hose storage rack fits 1 1/2", 1 3/4", 2", and 2 1/2" hose Brackets allow rack to swing out of cabinet or off wall 180 degrees when mounted on a wall or post. hose must be completely out of the rack before pressurizing. Made in the USA.
New-Line brand hand crank heavy duty industrial hose reel complete with 300 ft. of Goodyear No. 2G-14C/1/4 500 PSIG, fire-resistant, high pressure hose.
This is a used but in great condition Coaxsher SR-1 Endeavor SAR Pack. (Similar to FS-1 Wildland Firefighting Pack and can be converted for fire use). It was gently used for Search and Rescue.
Vintage Firefighting Nozzle made by Wooster Brass in Wooster Mass , Stamped on the nozzle it reads Wooster Brass NS Quadway Measures approx 7 1/2" Long the opening measures approx 1 3/4" ( probably for a 1 1/2" Hose ) This Nozzle adjustable spray pattern nozzle Condition is as pictured ! The Handle turns very easily and it has a nice worn patina ! The plastic on the tip has a cracked plastic piece you can see in the picture ( This is un-tested condition ) Great Display Item !
Vintage Firefighting Nozzle made by Elkhart Brass , Allenco Nozzle tip 7171L it is adjustable by turning Measures approx 8 1/4" Long the opening measures approx 1 3/4" ( probably for a 1 1/2" Hose ) This Nozzle adjustable spray pattern nozzle Condition is as pictured ! The Handle turns easily and it has a nice patina ! ( This is un-tested condition ) Great Display Item !
RED HEADS NHQUICK DISCONNECT?45 DEGREE? ELBOW4" LOCK TO 3" (INSIDE DIMENSION)ACQUIRED FROM RETIRED FIRE HOUSEVERY CLEANMIGHT HAVE MILD SURFACE RUST, OCCASIONAL PITTINGI DO NOT BELIEVE THEY WERE EVER USED
No. 4579 Super Spanner Hydrant Wrench • Operates standard 1- 1/2 ” and 1- 1/4 ” pentagon fire hydrant nuts. • Opens large and small bungs on 55 gallon drums.
This is a used Mallory Fire Equipment top mount skid.... replacement cost currently around $20,000... 350 gallons water, foam cell with Foam Pro proportioner...
This is a custom made tool, that is made for firefighters. The tools are made to be a preferred alternative to packing your turnout pockets with a ton of excess tools. My intent was to design a tool that would provide multiple purposes without sacrificing size or ability.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
