4 flange for sale, brand-new and used.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Product Specifications Part Number SF 2 11/16 Bore Diameter 2-11/16 inches

Lyndex Threaded Bushing - 1/2" Capacity 1-1/4" OD X 2-7/8" OAL1.41" Flange OD, 2.690" Length behind the flange26mm X 1mm threadThe picture is representative of the actual bushing It is a stock photograph of one bushing out of the group

LISTING IS FOR A USED ERICKSON NMTB50 TG200 COLLET CHU

3pc 5C Collet Stop Set American Made. Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D.

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

KERKAU - THREADED REDUCING FLANGE 3"X2"THD 150 CLASS RAISED FACE CARBON STEEL A105 ASME B16.5 3" flange to 2" threaded pipe. Total diameter: 7.5" 4 bolt holes: 3/4" Thickness: .9" (7/8") Raised face: 1/4" Weight: 10.5#

Sanitary Stainless Steel 316L 4" Blank Flange New

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

Multiple of Flanges available. Multiple sizes. semiconductorsystems.com has K&S Micro-Swiss O.D: 4.500 INCH O.D: 114.30 MM Flanges are in wood protective case and lock with custom padding We can expedite too IMPORTANT: Before mounting the flange set, clean the following parts with Alcohol: 1.