MP Pumps FLOMAX 8 Cast Iron PUMPAK — 6000 GPH, 40 PSI, 2 x 2 FLOMAX 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25' above the source. Once primed, the pump's built-in flkapper valve will maintain a full column of liquid in the suction line. A FLOMAX PUMPAK is a fully assembled and run tested pump end that can be easily coupled to any 3 or 5.5 HP gasoline engine standard 3/4" keyed shaft engine.
Water Pump 2 inch 6.5 HP Clear Water Pump 212cc Gas Engine Water Pump 151 GPM, Its actually kinda scary looking , appears that the unit was used with a tar machine since its covered in it . It Runs , it Pumps , it has a couple minor issues.. 1)Spark plug boot is cracked 2)its missing the air filter and top cleaner .
Pacer Water Pump — Model# SEB2PLE5.5 Water and chemical transfer pump is powered by a 6 HP LCT engine. 120ft. head and self-priming thermoplastic pump with glass reinforced polyester housing.
PRODUCT DESCRIPTION Model # PPTP1 0.1-HP Thermoplastic Transfer Pump 0.1-HP transfer pump ideal for temporary use of pumping water from surface levels areas like pool covers, sinks, waterbeds and stock 5.5-GPM provides the power t
PLEASE NOTE THE FOLLOWING!!!!!! PLEASE KNOW WHAT YOU ARE PURCHASING BEFORE ATTEMPTING TO PURCHASE THIS INDUSTRIAL GRADE PUMP!! THIS PUMP IS NOT FOR NORMAL RESIDENTIAL USAGE.
UP FOR SALE SUMP & GRINDER PUMP , HERE ARE THE SPECS : HP2 Switch Type Tether Voltage 208 Amps 13.9 Height (In.) 21-9/16" Dia. (In.) 11-1/2 Cord Length (Ft.) 20 Discharge NPT (In.) 1-1/4 Shaft Seal Carbon/ Ceramic
DAYTON 3BB79 Sump Pump, 1/2 HP, 1-1/2" NPT, 15 ft Submersible 115 V AC Cast Iron LAST ONE!!!! IN STOCK, Ships immediately!!! This is the CHEAPEST price ANYWHERE on a genuine part.
For sale is a used Sandpiper pump. This is a very nice pump!!! Sandpiper HDB2/DGN3SS This pump is used and is untested but was working well when removed from its environment.
Liquid Pump, 10 GPM, Ingersall-Rand Cameron Pump K 3/4 CKVSA This is a used liquid pump made by Ingersall-Rand, Cameron Pump Div, model K 3/4 CKVSA. In good used condition 10 GPM @ 100 Total HD FT Ports: 3/4" discharge 1" suction Shaft: 3/4" x 2" Specifications: MFG: Ingersall-Rand Model: K 3/4 CKVSA Serial: Volts: Amps:
UP FOR SALE SHALLOW WELL JET PUMP , HERE ARE THE SPECS : Motor Enclosure ODP Pump Material Cast Iron HP 1 Voltage 115/230 Amps 20/10.5 Inlet 1-1/4" NPT Outlet 1" NPT GPM of Water
UP FOR SALE PRESSURE BOOSTER PUMP , HERE ARE THE SPECS : Type High-Volume Motor Enclosure ODP Housing Material Cast Iron HP 2 Phase 3 Voltage 208-230/460 Amps 8.6-8.9/4.5 Hz
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
