New DUAL CYLINDER HEAVY LIFT 5' x 10' Dump Trailer Kit - Build Your Own Trailer Includes as Pictured: (2) 3-1/2" x 24" Cylinder (1) 12V DC Hydraulic Power Unit With Wired Remote (Single-Acting) (4) 3,000psi Hydraulic Hoses (4) Connectors to attach the hoses to the cylinders and power unit Lifting Capacity * Up to 10 Tons. * depending on your trailer des
New DUAL CYLINDER HEAVY LIFT 5' x 10' Dump Trailer Kit - Build Your Own Trailer Includes as Pictured: (2) 3-1/2" x 24" Cylinder (1) 12V DC Hydraulic Power Unit With Wired Remote (Double-Acting) (4) 3,000psi Hydraulic Hoses (4) Connectors to attach the hoses to the cylinders and power unit Lifting Capacity * Up to 10 Tons. * depending on your trailer design / specifics
New DUAL CYLINDER HEAVY LIFT 6' x 12' Dump Trailer Kit - Build Your Own Trailer Includes as Pictured: (2) 3-1/2" x 30" Cylinder (1) 12V DC Hydraulic Power Unit With Wired Remote (Single-Acting) (4) 3,000psi Hydraulic Hoses (4) Connectors to attach the hoses to the cylinders and power unit Lifting Capacity * Up to 10 Tons. * depending on your trailer design / specifics ***** PLEASE NOTE THAT THE CY
This is a small hydraulic cylinder. I am not sure what is was made to do. It has one inlet and appears to be made to be welded in place by the angle bracket.
29" HYDRAULIC CYLINDER 3525-2/D7329" OVERALL CYLINDER4 1/2" OD CYLINDER16" CYLINDER WITH 12 1/2" ARM WITH 1 /12" SHAFT27" CENTER PIN TO CENTER PIN1" PINS HOLESNUMBERS ON CYLINDER 3525-2/D273/A2216NEW CONDITION
Single-acting hydraulic cylinder with one port and spring return of single piston rod after 0.25" stroke Compact body for use in confined spaces Baked enamel finish for corrosion resistance 5-ton cylinder capacity for lifting or pushing
Simplex Hydraulic Hand Pump Special App P160-4 6500 psi With Cylinder Excellent THIS PUMP IS IN LIKE NEW CONDITION COMES WITH HYDRAULIC CYLINDER WITH 2 1/2 " THROW BUT YOU CAN USE ANY CYLINDER WITH THIS PUMP THIS IS THE SAME AS THE 1604A MODEL THEY MAKE NOW ONLY THIS HAS A MUCH BETTER QUALITY PUMP MECHANISM OPERATING INSTRUCTIONS AND PARTS BREAKDOWN INCLUDED SEE PICTURES FOR ALL DETAILS
This Hydraulic Cylinder Jack has been on the shelf in an outbuilding for many years and I don't know if it's new or re manufactured, It has a 1/4" pipe NPT hole in both ends, still the original plugs in them, It's made by Ortman Miller Mach Co. Inc. Hammond Ind.
Large hydraulic cylinder in very good condition. I believe it is new old stock and may go to a garbage compactor. 2" pin holes in each eye, 5" bore, 4" rod, roughly 5' stroke.
NEW CHIEF HYDRAULIC CYLINDER. PART NUMBER 207-428 IT IS;3 INCH BORE4 INCH STROKE1-1/2 ROD12 INCH RETRACTED16 INCH EXTENDEDSAE8 PORT SIZE1 INCH PIN HOLES3.500 OUTSIDE DIAMETER0.187 THICK WALLS
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
