(4) New Steel - Caster Wheel's (High Quality / Heavy Duty - Caster's) (2) Swivel Caster's / (2) Fixed (Straight Wheel's) 2" Inch - Diameter Wheel's (Rated at 150 lbs. - Each Wheel) These are "High Quality" - Steel Caster Wheel's (Used for Many Application's) Each Caster has (4) Mounting Hole's to Mount the Caster to the Area where Needed Shipping Cost's - $15.00 Lower 48 States in the US
This trio of used rubber wheel swivel casters have the same 5 by 4 inch slotted face plate. The trio have 6 inch hard rubber wheels, have the same grease fitting on the swivel and have axle grease fittings. However, the center wheel has an axle grease fitting in the axle end while the other two have fittings on the wheel.
Real nice pair of full rotating solid cast wheel casters. Heavy duty industrial grade and in excellent condition. 4 inch cast iron wheels marked with a 5.
Heavy duty casters in close to new condition. It seems that they have 1 3/4" by 2 7/8" bolt pattern-please see pictures. 5" wheel by 2" wide. Two casters are swivel with brake, two stationary.
This is a locking caster boot to fit 1 inch round legs from any table. There is a screw to tighten it inside as well with a locking wheel. Sold in a Set of 4
Long Handle Hoisting Wheel Steel construction and all metal cast wheel with bearings Use on ladder to hoist material or supplies to roof top. uses 3/4 or 1" manila or sisal This is a professional grade quality item and we sell to roofing wholesalers all over USA.. please see our store for many other roofing tools and other hoisting wheels Ladder not included...
Imperial Brass No. 123-F FLARING TOOL KIT with TUBING CUTTER for use on 3/16, 1/4, 5/16, 3/8, 1/2, 5/8 inch tubing. Tools are clean in very good working condition no wear, damage or abuse.
general Rodrunner Sewer and Drain Cleaning Machine w/220 FT 1-1/4 cable 22 pc. THIS UNIT DOSE NOT COME WITH ANY CUTTERS YOU CAN BUY AT ANY DEALER IN THE USA BUT I DO NOT HAVE ANY OHIO RESIDENTS OR PICKUPS IN OHIO ARE REQUIRED TO PAY 7.25% TAX UNLESS TAX EXEMPTION DOCUMENTS ARE PROVIDED Today I am selling a General RodRunner Sewer Cleaning Machine with 1-1/4" Cables I tested the machine and It spins the cable fordward and Reverse. The machine has a 3/4 hp motor .
This listing is for one of these fantastic brushes Twisted Knot Wheel Brushes: Ideal for weld cleaning, heavy flash removal, and rough surface preparation. Fabricated of high quality, high fatigue straight tempered wire for heavy and severe cleaning applications. Knot wheel brushes stainless steel in the .20".
1 wheel from a carton of 12 wheels, the carton and label will not be included. The part # is not marked on the wheels, only on the carton. Osborn 4" x 3/8" Arbor Hole x .014 Heavy Duty Knot Wire Wheels.
I have used these abrasive wheels to leave an attractive 80 Grit brushed finish on metal tools, instruments etc. Long 2-5/8 " long bristles work around workpiece features. List Price $68.43 I have arbor adapters listed on eBay for use on 1/2", 5/8", 3/4", 1", and 1-1/4" Diameter arbors.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.