4 pulley for sale, brand-new and used.

This is a new never use

This auction is for the Alloy or Pot Metal pulley as pictured. It is the drive pulley for a 4" Jointer of unknown Brand or Make. It is about 2" diameter 1/2" bore About 1 1/8" Thick overall.

12' Pole Pruner by Corona w/Swivel Pulley,Cuts 1 1/4" Branches,Lightweight

Amico 1.5mm Pitch 10 Teeth 6mm Bore Motor Part Timing Belt Pulley Sprocket

CNC Engraving Machine Accessory 5M Timing Pulley Belt Set Kit Reducer Ratio 2:1 - Timing Pulley Sizes are 30teeth with 10 mm bore and 15 teeth with 6.35mm Bore- The Pulley width is 16mm- Belt Length is 300mm with 60 teeth - Belt Width is 15mmNOTES: - The small timing pulley is also available with a 6mm or 8mm bore size... leave a note when ordering if you want a different bore size... if you don't leave a buyers note you will receive a 15 tooth with 6.35mm Bore small pulley!!!

Amico Aluminum Alloy XL Type 50 Teeth 8mm Pilot Bore Timing Pulley

uxcell Silver Tone Aluminum Alloy XL Type 12 Teeth 6.2mm Pilot Bore Timing Pulley

Pulley removed from an old 30 gal. champion air compressor with a single stage pump and 3 hp motor Outer Diameter: 11"Bore size: 3/4"Bore depth: 1"Bore type: Fixed Not machined for key-ways or set screws Fan blade design, meant to provide cooling, will move a lot of air. ALUMINUM construction.

Classic Archives Listing

BELT DRIVE ALIGNMENT Fixturlaser PAT - the final solution to all your belt alignment needs! With the Fixturlaser PAT, you are never in doubt on whether your belt transmissions are aligned or not. By using the groove as reference, you will achieve a precise alignment which reduces belt wear, bearing failures and vibrations.

Tree Climber Flipline-Lanyard,CE,Moveable Prusik,&Pulley Slack Tender,5M/16.5 Ft

This is a real nice original cast iron pulley for an Ottawa hit and miss or throttle governed gas engine. At least I'm pretty sure it is for an Ottawa...if it isn't please educate me. It is in excellent condition with no cracks, breaks, or repairs of any kind.