4 surface bolt for sale, brand-new and used.

Here we have a lot of 115 new long barrel 2 hole crimp lugs to fit 2/0 copper cable. These are made of solid copper and are tinned for corrosion resistance. These have the standard NEMA spacing of 1-3/4" on center for the two 1/2" bolt capacity holes.

For sale is a new, from the factory BE Whirl-A-Way pressure sweeper. If you have need of a way to offer driveway or sidewalk cleaning to your business options, or just want to clean up around your own home, then this product is a must. This attaches to any pressure washer that does not exceed the following specs.

FEDERAL SIGNAL JETSTROBE JETSTREAM CLEAR DOME END COVER LIGHTBAR LENS CRACKED #4 Z8552D054B Up for your consideration is this recovered Federal Signal JetStrobe Clear End Dome. It will fit models SJL1P, SJL2P and SJL3P. Also, please be sure to see the other JetStrobe replacement parts we have listed.

FEDERAL SIGNAL JETSTROBE JETSTREAM CLEAR DOME END COVER LIGHTBAR LENS CRACKED #3 Z8552D054B Up for your consideration is this recovered Federal Signal JetStrobe Clear End Dome. It will fit models SJL1P, SJL2P and SJL3P. Also, please be sure to see the other JetStrobe replacement parts we have listed.

FEDERAL SIGNAL JETSTROBE JETSTREAM CLEAR DOME END COVER LIGHTBAR LENS CRACKED #2 Z8552D054B Up for your consideration is this recovered Federal Signal JetStrobe Clear End Dome. It will fit models SJL1P, SJL2P and SJL3P. Also, please be sure to see the other JetStrobe replacement parts we have listed.

Whether you're removing a large amount of stock or just making the finest changes, this Jet belt/disc sander is definitely up to the task. A 3/4-horsepower motor supplies all the power you need for serious stock removal, and the platen has a graphite sheet that helps keep things cool, so you get more life out of both the sander and the belts. The 9-inch disc sander's table is a generous 7-1/2-by-12-inch cast iron surface, with preset stops at 45 and 90 degrees for reliable angles and nice

These blades are more than serviceable but do have blemishes and/or minor surface rust. They are new Wagman 8x18" bolt on combo blades that will come in sets of four (4) and will ship free

Stanley / BEST 45H7D3H630LHRB Storeroom Mortise Lever Lock:

Stanley / BEST 45H7D3H630RHRB Storeroom Mortise Lever Lock:

 

NEW NACHI VARIABLE VANE HYDRAULIC PUMP VDR2131A213 4.5L/MIN @1800 RPM 3.5 KG/CM2 MAX PRESSURE 1" SHAFT,APPROX 125MM BOLT PATTERN. BUYER PAYS USPS PARCEL POST SHIPPING ON 53LBS FROM 30527 2008-43 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBA

6685-00-906-3993 PRESSURE GAUGE 0-30LBS. NEW IN BOX, BOX IS DUSTY I DO COMBINE SHIPPING! MANUFACTURERS CODE 81349 PROTECTIVE CRYSTAL MATERIAL PLASTIC ACTUATING ELEMENT MATERIAL NICKEL-COPPER-ALUMINUM ALLOY MOUNTING METHOD FLUSH PANEL SCALE TYPE SINGLE

2 Sets NOS HKP Porter Bolt Cutters No. 4 and No. 5 Description

nice toggle clamps, some new some may have been used a bit , 1-3/8 height is height under the nut not including the rubber foot which will further reduce the grip height.  some have no rubber foot or bolt.

Point Technology Heat Exchanger SystemsTM No.1 Heat Exchanger Fabricator in the Nation! Fully PATENTED DESIGN! Making Blue Baron Truck Mounts #1!

DIES APPEAR UNUSED, BUT PACKAGING WORN FROM BEING KEPT IN A SERVICE TRUCK. IF THE LISTING SAYS 2 AVAILABLE YOU GET THE SET ON THE LEFT, IF THE LISTING SAYS ONE AVAILABLE YOU GET THE SET ON THE RIGHT012-11-01-3/8740 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect

~~** BAILEY 10DX4311CDE14P1C2DBA1132X4ADBC SIZE 3 120 VAC 60 HZ 4-20 MA FLOWMETER **~~ ~~** 10DX4311CDE14P1C2DBA1132X4ADBC SIZE 3 120 VAC 60 HZ 4-20 MA FLOWMETER **~~ ~~** 10DX4311CDE14P1C2DBA1132X4ADBC **~~ ~~** SIZE 3 IN 80 MM **~~ ~~** LINER: TEFLON **~~ ~~** ELECTRODE: HASTELLOY C **~~ ~~** SUPPLY: 120 VAC 60 HZ 23