4 surface bolt for sale, brand-new and used.

Nucor 1/4-28x1 1/2 Grade 8 Hex Bolt / Cap Screw - USA UNF Yellow Zinc, Pk 100 Item Description: Hex Bolt / Cap Screw - USA Size: 1/4-28x1 1/2 Thread Type: UNF (Fine Thread)

Nucor 1 3/4-5x8 Grade 5 Hex Bolt - USA UNC Plain Finish, Pk 8 Item Description: Hex Bolt - USA Size: 1 3/4-5x8 Thread Type: UNC (Coarse Thread) Grade:

Nucor 3/4-16x1 3/4 Grade 5 Hex Bolt / Cap Screw - USA UNF Zinc Plated, Pk 120 Item Description: Hex Bolt / Cap Screw - USA Size: 3/4-16x1 3/4 Thread Type: UNF (Fine Thread)

This is a lot of large vintage lag bolts that are 3/4 inch in diameter and measure 5 inches not including the head. They have some surface rust. 2 appear to be galvanized.

Genuine U.S. Military Issue Surplus   Metal Hanger Clamp with Stainless Steel Bolt Assembly 1 7/8" Inner Diameter 2 1/4" Outer Diameter x 11/16" Wide There is a 5/8" Length x 1/4" width slot one end. (See Picture) The overall length is 4 5/8" The hanger clamp is made of magnetic steel.

Genuine U.S. Military Issue Surplus   Lot of 2 - Raytheon  Tee Head Stainless Steel Bolts P/N: 4023519-0001 NSN: 5306-00-846-1088  Characteristics Thread Class: 2A Thread Direction: Right-hand Thread Length:   0.750 inches minimum and 0.780 inches maximum Fastener Length: 1.471 inches minimum and 1.501 inches maximum Head Style:     Tee no.

This is for qty.1 of a New old stock LARGE 2" diameter with 4.5 tpi threads per inch right hand threads eye bolt without a Flange. Has some very light surface corrosion from shelf time, nothing serious at all. It is made by Armstrong in the US America Model 89-016 The through hole measures approx.

Up for bid is an old vintage D Ring Shackle with it's bolt. It measures about 3 1/4 inches wide, and the bolt is about 2 inches long, and about 1/2 inch thick. Light surface rust, see photos.

System consists of (10) uprights 12'Hx48"D and (32) beams 8'Lx4"W Uprights are Builder Square style and Beams are T-Bolt style (nut and bolt to the uprights) This system can make (2) rows of storage rack each measuring 32' linear feet, each row would have 4 storage bays, 3 storage levels (floor plus 2 shelf levels) for a total of 24 pallet positions. Or you could run in one continuous row measuring approx. 74' linear feet with 9 storage bays for total of 27 pallet positions.

Double-Acting push/pull hydraulic Threaded-Body Cylinder with plunger head Bolt Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the work piece surface irregularities,also deflection and vibration under machining loads.&nb