4 threaded flange for sale, brand-new and used.

T-SLOT MOUNTED MILLING WORK STOP FEATURES: * BRAND NEW NEVER USED. NEWLY MANUFACTURED * FITS TAIG, SHERLINE AND OTHER MILLS OF COMPAIRABLE SIZE. * CLAMPS QUICKLY TO THE T-SLOTS ON THE MILLING TABLE .

Lyndex Threaded Bushing - 1/2" Capacity 1-1/4" OD X 2-7/8" OAL1.41" Flange OD, 2.690" Length behind the flange26mm X 1mm threadThe picture is representative of the actual bushing It is a stock photograph of one bushing out of the group

3pc 5C Collet Stop Set American Made. Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D.

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

Vertex, Milling, Universal Dividing Head with 6" 3 Jaw Chuck, New. var numImgsLoaded = 0; function autoSizeImageForSlideshow(imageIn

Reuse, Recycle, Repurpose Chicago 778-SVBCP Hygiene and Salon Faucet Bed Pan Cleaner Description: The Chicago 778-SVBCP Hygiene and Salon Faucet. Th

Micro Stop Countersink 5 piece Kit w/ 1/4-28 threaded Countersink Cutters - New Kit includes 2 Micro-Stop Countersinks - Standard and Wide-Flange (teflon no-scratch flange) - New Kit Includes 3 Countersink Cutters (100 degree)- sizes #40, #30, #21 (1/4 x28 threaded spindle) - New Ball Bearing Style. RPM rated up to 10,000. 1/4" shank on Micro Stop Countersinks.

This Ingersoll Rand Electric EL2603N torque is new, comes with the power cord, manual and is in the original box. What you see is what you will receive.

Dipperwell and Faucet 129 DIPPERWELL Stainless steel inner and outer shell. Fits opening 5-1/2" to 6". Flange diameter 6-7/8".

Description IMMERSION ELEMENT, [ 200/240V 5000/7200W 3PH ] [ 3" ROUND FLANGE; 10-3/4" LONG INSIDE ] [TERMINALS {SCREW 10-32 }, 3" ROUND RUBBER GASKET # 32-1134 HAS THREADED STUD IN CENTER. HOBART DISHWASHER AM-14, AM-14C

This is off a machine that never did get used. It's inlet is 1/2" Female NPT and the outlet is a 1/4" male NPT. General Information Case Drain: No Case Drain Inlet And Outlet Ports Size: Manifold Ports 5/16"-18 UNC Thread Geometric Displacement (cu-iIn./rev): 14.10 Output Shaft Size: 1" Straight With Woodruff Key Series: H Series Gerotor Motor SPECIAL FEATURES: Not Listed Type Of Mount: 4 Bolt - 1-3/4" Pilot Dia.

var itemNumber = window.ebayItemID ?

Description: Offered for your convenience is the set of components needed to connect your pressure regulator high pressure inlet to a CGA-580 Inert Gas (Argon, Helium, Nitrogen) gas cylinder (of type shown). The nipple is 3" in length, providing a little more stand-off of the regulator from the tank valve than others available on Ebay. These components are new in package and rated up to 3000 PSIG by Western Enterprises.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.

Save big $$ on this used wash tank heater element ( CHROMALOX ) IN GOOD USED WORKING CONDITION FROM A : HOBART AM14 AM-14 DISHMACHINE IN A COMMERCIAL KITCHEN. MACHINE WAS PULLED OUT OF SERVICE DUE TO ONBOARD RINSE BOOSTER HEATER TANK RUPTURE..... DECIDED TOO COSTLY TO REPAIR, SO THEIR LOSS IS YOUR GAIN!!

1/4" Threaded Rod Hanger For 5/16" To 1/4" Flange (Box of 100) This hanger will fit on a 5/16" to 1/4" flange. Compatible with 1/4" Rod.

3/8" Threaded Rod Hanger For 5/16" To 1/4" Flange (Box of 100) This hanger will fit on a 5/16" to 1/4" flange. Compatible with 3/8" Rod.

3/8" Threaded Rod Hanger For 1/6" To 5/32" Flange (Box of 100) This hanger will fit on a 1/16" to 5/32" flange. Compatible with 3/8" Rod.