4.375 for sale, brand-new and used.

****PLEASE READ ENTIRE DESCRITION!!!!**** **4" Sandvik RA762-102R38A-22H Aluminum Face Mill w/ 48 Carbide Diamond Tipped Inserts** LIKE NEW 4" Sandvik RA762-102R28A-22H Face Mill. Set Height 2.375 Max Rpm 11,000 Holds 12 Kennametal K-2034 Carbide-Diamond Tipped Inserts This face mill was purchased at auction with a lot including many extra inserts. THE INSERTS INCLUDED IN THIS AUCTION ARE NOT NEW.

SquareTrade © AP6.0 SCHERR TUMICO 18" INSIDE/OUTSIDE .001 VERNIER CALIPERS NO. 375-18 W/CASE You are bidding on a Scherr Tumico Double Sided 18 Inch - inside and outside measuring- Vernier Calipers, Catalogue No. 375-18.

The 45 Degree Angle Block ( Part Number BLK-45 ) is used to hold Probe Characterizing Spheres inclined at 45 degrees, so they are more accessible for C.M.M. calibration. The block may be located in an out of the way place on the CMM table, while projecting the characterizing sphere out into the working zone of the machine.

This set has been used very little and it like new. Technical Specifications Reading: Balanced Series: 196 Range per Revolution (In.): 0.100 Finish: Chrome Range: 0.200" Range (In.): 0.200 Dial: White Color: White Bearings: Jeweled Graduations: 0.001" Graduations (In.): 0.001 Range per Revolution: 0.100" Bezel: Adjustable Contact Points: 3 Includes: Antimagnetic Indicator with 3 Contact Points, 4 Attachments in Case

Brand new, never used! Dial Test Indicators and SetsComparative instruments check against

BRAND NEW IN BOX! Starrett 2730-4 Wisdom Basic LCD Electronic Indicator, 0.375" Stem Dia., 2.28125" Dial Dia., 0-1"/0-25mm Range, 0.001"/0.02mm Graduation

This very versatile Starrett test indicator series has the following value-packed features: Smooth and accurate operation due to their sturdy, basic design Hardened, stainless steel AGD stem .375" (9.5 mm) diameter Shank dimension 1/4" (6.3 mm) diameter, 3-3/16" (80 mm) long No. 650 Indicators have a 3" (75 mm) deep hole attachment that connects directly with the main spindle for positive action.

Starrett Dial Indicator Pocket Gages No. 1010 Series (.375 inch) These Starrett Dial Indicator Pocket Gages are approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8 inch or 9 mm thick.

AWS DCS Carbon Steel Calibration Test Block Specifications:

LISTED IS A 36" SUNNEN BORE GAGE WITH TIPS 1 THRU 6 AND A 7 1/2" EXTENSION. DOES NOT HAVE A INDICATOR. DOES HAVE SEVERAL TOOLS AND A SMALL SUNNEN STEEL BOX TO KEEP POINTS AND TOOLS IN.

Johnson Gage external thread inspection for lead/ angle UN (P/4). 16 sets of gages consisting of .190-24UNRC 3A 10-32UNF 2A .250-20 UNC 2A / .250-28 UNF 2A 3125-24 UNF 2A .375-24UNF 2A .4375-14 UNC 2A / .4375-20 UNF 2A I also have set from 1/2" to 3/4" & Pitch Diameter rolls set I will be listing 30 day guarantee to be in good working condition and as stated. For more information email or call 479-651-1352.

Learn the 10 specific reasons why over 14,000 customers have purchased a FenderSplendor Coating Thickness Gauge (Mil Gauge) in the last 15 years. See why the FS 502 is your absolute best choice in a hand held thickness gauge. Also, learn how you

1 FEDERAL BORE INDICATOR IN WORKING CONDITION ALONG WITH 2 COMTOR INDICATOR'S THAT ARE QUESTIONABLE FUNCTIONING ARE INCLUDED IN THE LOT. 26 GAGES COME WITH RING GAGES BESIDES 7. THE GAGE SIZES ARE AS FOLLOWS:.125.250.315.354.375.500.553.563.625.635.676.750(2).875.937 NO RING GAGE1.001.0451.2601.3131.3731.378 NO RING GAGE1.545 NO RING GAGE1.574(4) NO RING GAGE FOR ALL 4

SquareTrade © AP6.0 TOHNICHI TORQUE GAUGE 1.5-0.02 OZF-IN. ATG1.5Z - FREE SHIPPING You are bidding on a Tohnichi Torque Gauge, Model ATG1.5Z. For measurement of micro torque and calibration of torque tools.

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.