40 in hex for sale, brand-new and used.

7/16 DIN Male to N Female Adapter IP67 Mated Commonly used to adapt 7/16 DIN to N TECHNICAL DATA SHEET Configuration Connector 1 7/16 DIN Male Impedance 1 50 Ohms

This auction is for a 40 x 80 x13 Steel Truss Pole Building. The plans included are the plans I submitted to the building department and were accepted and show live and dead loads also snow and wind loads on the building. The building was purchased as an aircraft hangar and was ordered before we found out that two HOA members on the airpark would not allow this building to be built on our property.

Goulds Bruiser Pump 1/2 HP 10 GPM  Submersible water well pump that features abrasive handling construction, stainless steel casing, and a check valve that can be easily removed for drain-back systems or replacement. Manufacturer: Goulds Model: 10SB05-412 Horsepower: 1/2 GPM: 10 Voltage: 230V, 60HZ Phase: Single-Phase, 3-wire Features: Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand handling capabilities.

Brand SK11 Package size L:40xW:40xH:45mm?@Weight:60g dia(mm):.40 Shank:6.35 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

This item is: Qty = 40: Hex Threaded Rod Couplings 3/8"-16, x 1 3/4" Long, Fits a 5/8" Wrench Sales tax of 7.4% will be added to items shipping to locations in Kansas. Includes 40 x what is shown in the picture.

Here is the story with these bolts. I have been hired to represent a third party. This party has been left with a building that their parents used as storage.

Snow Peak Titanium Compact Cookset Trek Combo SCS-010 Tracking 1400 &900 Description

Welcome to BE Quality Industrial. Most items are purchased from Nuclear Power Plants and all are of the absolute highest standards and quality. You are buying the best of the best for a fraction of the cost.

Welcome to BE Quality Industrial. Most items are purchased from Nuclear Power Plants and all are of the absolute highest standards and quality. You are buying the best of the best for a fraction of the cost.

BOLT BARN KIT #108 2011 PIECE GRADE 8 COARSE THREAD FASTENER ASSORTMENT Grade 8 Hex Cap Screws - Zinc & Yellow Plated Grade 8 Finished Hex Nuts - Zinc & Yellow Plated Grade 8 SAE Pattern Flat Washers - Zinc & Yellow Plated Alloy Medium Lock Washers - Zinc & Yellow Plated Grade 8 Hex Ca

10-Pack Gold Seal Hose Clamp H 16 SS 3/4 to 1-1/2 19 - 38 mm “H-SS” Series with "400" Series Stainless Steel Screw Band and housing are 200/300 series stainless steel. Screw is 5/16” slotted hex head, heat treated 400 series stainless steel. The high corrosion resistance of this all stainless steel band, housing and screw makes this the perfect clamp for numerous industrial installations.

80 Pcs Threaded Hex Nuts Fasteners Ring Set w Round Metal Washers

Alloy Steel Allen Hex Eye Bolt Wrench Hook Endeded 5/8" x 17" x 2"(Ring). This new US GI wrench is an easy tool for adjusting and torking Eye bolts and bridle rings. Will make easier and faster the right torque.

THIS IS A CDI 401SM MICRO ADJUSTABLE SCREWDRIVER 5-40 INCH POUNDS WITH BITS IN A CASE. THEIR IS 2 FLAT TIP 2 PHILLIPS A NO 1 AND NO2 AND A HEX TO 1/4 DRIVE ADAPTER. THE NO 1 PHILLIPS LOOKS LIKE IT WAS USED ONCE, EVERYTHING ELSE INCLUDING TOOL AND BITS LOOKS NEW NEVER USED.HAS A NEW CALIBRATION STICKER THAT THEY COME WITH.

ROBOTICS; MOTOR DRIVERS - STEPPER MOTORS; PROCESS CONTROL SYSTEMS AND INTERFACES; M2M INTERFACING; PROGRAMMABLE ROBOTS, DEVICES, SYSTEMS & PROJECTS; DRIVERS: MOTORS, SOLENOIDS, HEATERS, COOLERS, POWER SUPPLIES, POWER CONTROLLERS, LOCKS, OPENERS, CLOSERS, MECHANICAL DRIVE DEVICES, VALVES, MECHANICAL POSITIONER DRIVE, CAMERA POSITIONER, RIFLE POSITIONER, CANNON POSITIONER, ETC.!

Product Detail

Due to the fall of the national currency, we offer products at extremely low prices. Kit consists of 10 gauges and additional components for monitoring and documenting condition of cracks in buildings and civil engineering structures. The kit contains: 10 x Gauge for monitoring cracks (2D) 1 x Crack Width Gauge (also used for marking holes) 40 x Mounting plate (2&3 mm thickness) 3 x Adjusting plate (1, 2, 3 mm) 4 x Temporary fastening screws

Item Title: Spec Tech USA Hex Head Bolts Item Description: Military Grade 8, 1/2" X 4", 40 ea. Model: #MS90728-171 Weight: 17 lbs Package Condition: Good Item Condition: New Listing Code: B4DR-6526M Shipping: We generally ship within 1 business day of your payment; however, we ship same business day of payment when possible. Payments made after 2 p.m.