US $2,950.00
Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Brand | Unknown |
Directions
Similar products from Tools for Fabrication Equipment
Baileigh RDB-10 NEW PIPE BENDERS, Manual; includes dies for 3xD and 5xD bends
6.25" Thrt Baileigh HP-160 NEW IRONWORKER, Manual Sheet Metal Punch
95 Ton 16" Thrt Baileigh SW-95 NEW IRONWORKER, 5 Station Dual Operator, 10 Hp, 3
132 Ton 16" Thrt Baileigh SW-132 NEW IRONWORKER, 5 Station Dual Operator, 15 Hp,
84 Ton 12.25" Thrt Baileigh SW-84 NEW IRONWORKER, 5 Station Dual Operator, 10 Hp
62 Ton 8" Thrt Baileigh SW-623 NEW IRONWORKER, 5 station, 5 Hp, 220V, 3-phase
50 Ton 6" Thrt Baileigh SW-501 NEW IRONWORKER, 5 station, 3 Hp, 220V, single pha
120 Ton 21.5" Thrt Piranha SEP-120 PUNCH PRESS
0.25" Cap. 120" W Wysong Tru-Fab SO-1025 SHEAR, Front Operated Power Back Gauge
12Ga Gauge 72" L Whitney-Jensen 612 APRON BRAKE
4" W 0.078" Cap. Rapid Air S4V STRAIGHTENER
70 Ton 19.69" Strk Muller-Weingarten CLZ 63.1.11 HYDRAULIC PRESS, Die Cushion /
1.5" W 2" Strk Rapid Air A2 PRESS FEED
275 Ton 161.4" Bed Amada RG-250 PRESS BRAKE, NC9EX-II CNC Back Gauge
10" W 10" Strk Rapid Air J10 PRESS FEED
0.125" Cap. 60" W Betenbender 5'-125 NEW SHEAR, Low Profile Hydraulic Shear, MAD
50 Ton 96" Bed Betenbender 8'-50 NEW PRESS BRAKE, Made in the USA
1200Lb Cap. 18" W Cooper-Weymouth 1200-18P UNCOILER, ized
600Lb Cap. 10" W Littell 5G UNCOILER, ized
1.5" W 4" Strk P/A Industries PRESS FEED
People who viewed this item also vieved
TURRET LATHE 0.973 I.D. SOCKET SLEEVE 1-3/4" OD X 4-1/4" LONG #9414
TURRET LATHE 1.075 HEX SOCKET 1-7/8" OD X 4-5/8" LONG #9405
TURRET LATHE 5/8" SPLIT SOCKET 2-1/2" OD X 3-15/16" LONG #9422
Haas TM-2 CNC Vertical Toolroom Mill with Automatic Tool Changer
Milling machine tooling - fly cutters, arbor, high speed tools
2001 Hardinge 1000 II CNC Turning Center
Malco 2 in 1 8" Hand Riveter Rivet Gun
BROWN & SHARPE 1000 DIVIDING HEAD
2 Pieces LOC-LINE 41401 1/4" Hose Segment Pack 5-3/4" Long New
Dumore Tool Post Grinder Series 14
Antique Tools-vintage Drill Sharpener
HOUGEN 1405-96 Mag drill,WORKS GREAT!!! for 1-1/4" Shank.
IK-405-10 Coil-Sert M10x1.25 Thread Repair Kit (no drill)
Special T Fasteners KN 428J 1/4-28 K94178001 Tridial Heli Coil Thread LOT # 8
#9703: Clausing Automatic Horizontal Bandsaw
DoAll C-305A Automatic Band Saw 12" X 12"
HEM SAW H1200A HORIZONTAL BAND SAW 12.75" X 11"
Sunnen Honing Mandrels , misc. lot of 10
Sunnen Honing Mandrels , misc. lot of 6
Sunnen Honing Madnrels , misc. lot of 9
(4) EROWA Chucking Spigot F/A EDM M10 x 45 EDM TOOLING electrode holders cnc
(5) EROWA Chucking Spigot F/A EDM M10 x 45 EDM TOOLING electrode holders cnc
(15) EROWA Chucking Spigot F/A EDM M10 x 45 EDM TOOLING electrode holders cnc
Brown & Sharpe 00MA Turret Automatic Lathe Bump Recessing Tool 5/8" Shank
Geometric 9/16 Die Head, 3/4" Straight Shank, No Chasers
GEOMETRIC 1" DS BUMP OR PULL OFF W/14 SETS OF CHASERS 1" SHANK 2" LONG 5/8" HOLE
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies