US $27,500.00
Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Brand | Muller-Weingarten |
Model | CLZ 63.1.11 |
Directions
Similar products from Tools for Fabrication Equipment
95 Ton 16" Thrt Baileigh SW-95 NEW IRONWORKER, 5 Station Dual Operator, 10 Hp, 3
132 Ton 16" Thrt Baileigh SW-132 NEW IRONWORKER, 5 Station Dual Operator, 15 Hp,
84 Ton 12.25" Thrt Baileigh SW-84 NEW IRONWORKER, 5 Station Dual Operator, 10 Hp
62 Ton 8" Thrt Baileigh SW-623 NEW IRONWORKER, 5 station, 5 Hp, 220V, 3-phase
50 Ton 6" Thrt Baileigh SW-501 NEW IRONWORKER, 5 station, 3 Hp, 220V, single pha
120 Ton 21.5" Thrt Piranha SEP-120 PUNCH PRESS
0.25" Cap. 120" W Wysong Tru-Fab SO-1025 SHEAR, Front Operated Power Back Gauge
12Ga Gauge 72" L Whitney-Jensen 612 APRON BRAKE
4000Lb Cap. 20" W Unknown UNCOILER, ized
4" W 0.078" Cap. Rapid Air S4V STRAIGHTENER
1.5" W 2" Strk Rapid Air A2 PRESS FEED
275 Ton 161.4" Bed Amada RG-250 PRESS BRAKE, NC9EX-II CNC Back Gauge
10" W 10" Strk Rapid Air J10 PRESS FEED
0.125" Cap. 60" W Betenbender 5'-125 NEW SHEAR, Low Profile Hydraulic Shear, MAD
50 Ton 96" Bed Betenbender 8'-50 NEW PRESS BRAKE, Made in the USA
1200Lb Cap. 18" W Cooper-Weymouth 1200-18P UNCOILER, ized
600Lb Cap. 10" W Littell 5G UNCOILER, ized
1.5" W 4" Strk P/A Industries PRESS FEED
0.625" Dia. Diacro 2 BILLET SHEAR, MADE IN USA
People who viewed this item also vieved
TURRET LATHE 5/8" SPLIT SOCKET 2-1/2" OD X 3-15/16" LONG #9422
DMC GOLD TURN 225R (DL 21 LA) 8" inch CNC Horizontal Lathe
TURRET LATHE FLANGED TOOLHOLDER 1-3/4" ID X 4-1/4" X 3-1/8" DIA. BOSS #9568
2001 Hardinge 1000 II CNC Turning Center
*Used machine pallet Mazak H400 horizontal machining center hmc 400mm x 40mmm*
Shell Indexable Insert Mill - Radius .75" Dia Round Insert
2 Pieces LOC-LINE 41401 1/4" Hose Segment Pack 5-3/4" Long New
Rohm Spiro 1/2" Keyless Drill Chuck - Jacobs #J6 Chuck Taper - COMPLETE
VINTAGE MACHINISTS DERBYSHIRE LATHE " ELECT" 18"Model ONLY! GE/MOTOR and PULLEY
Antique Tools-vintage Drill Sharpener
Darex Drill Doctor Model DD750SP Precision Drill Bit Sharpener 110 Volt
FreePort SGS-618B 6" X 18" Hand Operated Surface Grinder
Special T Fasteners KN 428J 1/4-28 K94178001 Tridial Heli Coil Thread LOT # 8
SNOW Model DR-2 Tapping Machine
1" Round NC NF & NS Dies & Die Stock Handles 1/4"-28 NF to 5/16"-32 NS
#9703: Clausing Automatic Horizontal Bandsaw
DoAll C-305A Automatic Band Saw 12" X 12"
HEM SAW H1200A HORIZONTAL BAND SAW 12.75" X 11"
Sunnen Honing Mandrels , misc. lot of 6
Sunnen Honing Madnrels , misc. lot of 9
Abrasive Air Sand Blasting Blaster Blast Cabinet Glass Bead Media WITH EXHAUST
(4) EROWA Chucking Spigot F/A EDM M10 x 45 EDM TOOLING electrode holders cnc
(5) EROWA Chucking Spigot F/A EDM M10 x 45 EDM TOOLING electrode holders cnc
(15) EROWA Chucking Spigot F/A EDM M10 x 45 EDM TOOLING electrode holders cnc
Geometric 9/16 Die Head, 3/4" Straight Shank, No Chasers
GEOMETRIC 1" DS BUMP OR PULL OFF W/14 SETS OF CHASERS 1" SHANK 2" LONG 5/8" HOLE
GEOMETRIC 1/2" 13 Projection chasers for 1" DS Threading Head. New
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies