+ Post new Ad
5.00" Deluxe Cutter/R8 Holder & Carbides Brand NEW!, US $117.95 – Picture 0
5.00" Deluxe Cutter/R8 Holder & Carbides Brand NEW!, US $117.95 – Picture 0

5.00" Deluxe Cutter/r8 Holder & Carbides Brand New!

US $117.95

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Open on mobile:
QR code
                 Deluxe X-Large  Fly Cutter &  R8 Holder  ALL Brand NEW!      USA             The Fly Cutter is:   5.00"   Diameter    Cutter made from 1045 Steel.     Also included is a New R8 Holder.  Has 1.00" Pilot and  .375 drive key ways.     Large headed 1/2"-20 Locking cap included.          The Cutter holds up to 5/16" Square shank bit.  Pockets are milled at 5.0 Degree Angle.     There are three 1/4-20  Set screws for each tool.  6X--Set screws included.  New.     With cutter are 2X--New 5/16" Brazed carbide tools.  New.    Included are:  R8 holder, 5.00" Cutter and 2X--5/16"Shank Carbide Tipped cutters.    C5 Carbide.    NEW!                Nice big cutter for your Bridgeport.      Everything Brand NEW!!!!!          I'll be starting the bidding at:  $84.95    
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Custom Made!!
Country of Manufacture United States
Model Diameter: 5.00"

Directions

Similar products from Tools for Milling Machines

Bison Bial - NMTB40-3/4" SHELL MILL ARBOR TOOLHOLDE QTY:1

Bison Bial - NMTB40-3/4" SHELL MILL ARBOR TOOLHOLDE QTY:1

  • East Aurora, New York, United States
  • Jan 30th
Fadal 1010-6 Board from 88HS VMC15XT CNC Mill #2

Fadal 1010-6 Board from 88HS VMC15XT CNC Mill #2

  • El Monte, California, United States
  • Jan 30th
Jacobs 6A Drill Chuck for Milling Machines

Jacobs 6A Drill Chuck for Milling Machines

  • Unionville, Pennsylvania, United States
  • Jan 30th
ATLAS MILLING MACHINE M1-241A LARGE BACK GEAR ASSEMBLY FINE USED PART.

ATLAS MILLING MACHINE M1-241A LARGE BACK GEAR ASSEMBLY FINE USED PART.

  • Niles, Michigan, United States
  • Jan 30th
NEW ATLAS MILLING MACHINE REPLACEMENT HEADSTOCK COUNTERSHAFT BELT LINK STYLE NEW

NEW ATLAS MILLING MACHINE REPLACEMENT HEADSTOCK COUNTERSHAFT BELT LINK STYLE NEW

  • Niles, Michigan, United States
  • Jan 30th
RARE ATLAS MILLING MACHINE M1-200 INDEX CENTERS SET GOOD USED WITH 7 GEARS USED

RARE ATLAS MILLING MACHINE M1-200 INDEX CENTERS SET GOOD USED WITH 7 GEARS USED

  • Niles, Michigan, United States
  • Jan 30th
NIAGARA SIDE MILLING CUTTER 6" X 1/2" X 1-1/4" HSS STK1388

NIAGARA SIDE MILLING CUTTER 6" X 1/2" X 1-1/4" HSS STK1388

  • Wadley, Alabama, United States
  • Jan 30th
NIAGARA STAGGARED TOOTH MILLING CUTTER 6" X 3/8" X 1" HSS STK1389

NIAGARA STAGGARED TOOTH MILLING CUTTER 6" X 3/8" X 1" HSS STK1389

  • Wadley, Alabama, United States
  • Jan 30th
5/8" Slitting Saw Arbor & 4X Blades All New!!!

5/8" Slitting Saw Arbor & 4X Blades All New!!!

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Cat-40 X 1.250" Holder & 3X Mills Great Deal!!!

Cat-40 X 1.250" Holder & 3X Mills Great Deal!!!

  • Milwaukee, Wisconsin, United States
  • Jan 30th
MAHO MH800W 4 Axis Universal Machine Used in Stock MAHO MAHO MAHO

MAHO MH800W 4 Axis Universal Machine Used in Stock MAHO MAHO MAHO

  • Hartland, Wisconsin, United States
  • Jan 30th
HERMLE UWF 1000 3 Axis CNC Machine HERMLE,HERMLE UNIVERSAL

HERMLE UWF 1000 3 Axis CNC Machine HERMLE,HERMLE UNIVERSAL

  • Hartland, Wisconsin, United States
  • Jan 30th
NEW ATLAS MILLING MACHINE REPLACEMENT CHANGE O MATIC KNOB REPLACES MF-38 NEW

NEW ATLAS MILLING MACHINE REPLACEMENT CHANGE O MATIC KNOB REPLACES MF-38 NEW

  • Niles, Michigan, United States
  • Jan 30th
DoAll Cold Air Gun, Vortec, Gauge, Magnetic Base, Machining, CNC LOOK

DoAll Cold Air Gun, Vortec, Gauge, Magnetic Base, Machining, CNC LOOK

  • United States
  • Jan 30th
New A.B. Tools .125 X 48 Degree Dovetail Cutter O-Ring DS125-48 Lathe Mill Oring

New A.B. Tools .125 X 48 Degree Dovetail Cutter O-Ring DS125-48 Lathe Mill Oring

  • Redwood City, California, United States
  • Jan 30th
original atlas craftsman 6'' milling attachment M6-501 fits metal lathe

original atlas craftsman 6'' milling attachment M6-501 fits metal lathe

  • Millstadt, Illinois, United States
  • Jan 30th
3/4" Diameter, 3/32" Wide HSS KeySeat Cutter Moon Cutter #NWKY75-332 USA

3/4" Diameter, 3/32" Wide HSS KeySeat Cutter Moon Cutter #NWKY75-332 USA

  • Seminole, Florida, United States
  • Jan 30th
Lot of . HSS Milling Saw Cutter w/ 1" Arbor Hole

Lot of . HSS Milling Saw Cutter w/ 1" Arbor Hole

  • Norwalk, California, United States
  • Jan 30th
LOT OF ASSORTED HEAVY DUTY HSS DRILL

LOT OF ASSORTED HEAVY DUTY HSS DRILL

  • Norwalk, California, United States
  • Jan 30th
LOT OF THURSTON ASSORTED HSS SLITTING SAWS w/ 1/2" ARBOR HOLE

LOT OF THURSTON ASSORTED HSS SLITTING SAWS w/ 1/2" ARBOR HOLE

  • Norwalk, California, United States
  • Jan 30th

People who viewed this item also vieved

WARNER & SWASEY SLIDE TOOL FOR LATHE #7553

WARNER & SWASEY SLIDE TOOL FOR LATHE #7553

  • Chino, California, United States
  • Mar 26th
LOT OF 3 MINI MIGET SIZED SPANNER PIN ETC. WRENCHES WRENCH TOOLS METALWORKING

LOT OF 3 MINI MIGET SIZED SPANNER PIN ETC. WRENCHES WRENCH TOOLS METALWORKING

  • Nashport, Ohio, United States
  • Mar 26th
Unimat Lathe. Collets and Collet holder

Unimat Lathe. Collets and Collet holder

  • Arvada, Colorado, United States
  • Mar 26th
Tapco 10379 Pro Cutoff

Tapco 10379 Pro Cutoff

  • Deatsville, Alabama, United States
  • Jun 28th
STRAPMASTER - SHAW AERO DEVELOPMENT Bohn Combl - shear, punch, crimp

STRAPMASTER - SHAW AERO DEVELOPMENT Bohn Combl - shear, punch, crimp

  • Little Falls, Minnesota, United States
  • Jun 29th
Toilet Seat Damper slow close toilet seat

Toilet Seat Damper slow close toilet seat

  • Shenzheng, Alabama, United States
  • Feb 25th
VINTAGE ANTON MACH. WKS. 3" GRINDING VISE MACHININIST VICE MILLING DRILL PRESS

VINTAGE ANTON MACH. WKS. 3" GRINDING VISE MACHININIST VICE MILLING DRILL PRESS

  • Hadley, Pennsylvania, United States
  • May 24th
Wheel Arbor For Surface Grinder

Wheel Arbor For Surface Grinder

  • Phoenix, Arizona, United States
  • May 24th
Vectrax Surface Grinder, model JL-618MB

Vectrax Surface Grinder, model JL-618MB

  • Elkhart, Indiana, United States
  • May 24th
Jacobs No. 34 Machinist Taper Arbor Drill Chuck Capacity 0 - 1/2" # 3 Chuck Key

Jacobs No. 34 Machinist Taper Arbor Drill Chuck Capacity 0 - 1/2" # 3 Chuck Key

  • Sanford, Florida, United States
  • May 25th
Jacobs No. 6 Machinist Taper Arbor Drill Chuck

Jacobs No. 6 Machinist Taper Arbor Drill Chuck

  • Sanford, Florida, United States
  • May 25th
Antique Patent 1885 IMPROVED WESTCOTT LITTLE GIANT 2 JAW Drill Chuck Working

Antique Patent 1885 IMPROVED WESTCOTT LITTLE GIANT 2 JAW Drill Chuck Working

  • Sanford, Florida, United States
  • May 25th
DoAll Horizontal Band Saw Work Stop

DoAll Horizontal Band Saw Work Stop

  • Delafield, Wisconsin, United States
  • May 27th
14" BROBO SEMI-AUTOMATIC METAL CUTTING COLD SAW MODEL S350D,2006,NEW MOTOR

14" BROBO SEMI-AUTOMATIC METAL CUTTING COLD SAW MODEL S350D,2006,NEW MOTOR

  • Pinellas Park, Florida, United States
  • May 27th
Greenlee 1348 Mobile Horizontal Band Saw

Greenlee 1348 Mobile Horizontal Band Saw

  • New Albany, Indiana, United States
  • May 27th
PNEUMATIC RIVET NUT SETTING TOOL / NUTCERT AIR TOOL MADE BY STANLY

PNEUMATIC RIVET NUT SETTING TOOL / NUTCERT AIR TOOL MADE BY STANLY

  • Fair Haven, New Jersey, United States
  • May 27th
ROPER WHITNEY # 51 SHEAR ANGLE IRON BENDER 2X22X1/4 WHITNEY

ROPER WHITNEY # 51 SHEAR ANGLE IRON BENDER 2X22X1/4 WHITNEY

  • Fair Haven, New Jersey, United States
  • May 27th
ROPER WHITNEY # 4 SHEAR ANGLE IRON SHEAR 2X22X1/4 WHITNEY

ROPER WHITNEY # 4 SHEAR ANGLE IRON SHEAR 2X22X1/4 WHITNEY

  • Fair Haven, New Jersey, United States
  • May 27th
SODICK EDM FLUSH CUPS FOR OEM # 3081595 SODICK 300AWT

SODICK EDM FLUSH CUPS FOR OEM # 3081595 SODICK 300AWT

  • Mundelein, Illinois, United States
  • May 28th
SODICK EDM FLUSH CUPS OEM#3081604 AUTO THD UPPER 6MM ID

SODICK EDM FLUSH CUPS OEM#3081604 AUTO THD UPPER 6MM ID

  • Mundelein, Illinois, United States
  • May 28th
MITSUBISHI EDM FLUSH CUPS OEM# S341 UPPER DWC90H1,A,B,Z

MITSUBISHI EDM FLUSH CUPS OEM# S341 UPPER DWC90H1,A,B,Z

  • Mundelein, Illinois, United States
  • May 28th
ALLIED HIGH TECH PRODUCTS TECH CUT 10" SAW

ALLIED HIGH TECH PRODUCTS TECH CUT 10" SAW

  • Libertyville, Illinois, United States
  • May 29th
General Electric Standard Roughness Specimens

General Electric Standard Roughness Specimens

  • Dublin, Virginia, United States
  • May 29th
Hardinge 2H 1/2" Collet*NEW*

Hardinge 2H 1/2" Collet*NEW*

  • Ansonia, Connecticut, United States
  • May 29th
Work Stop Feed Finger Brown Sharpe Boyer Schultz Screw Machine Turret Lathe

Work Stop Feed Finger Brown Sharpe Boyer Schultz Screw Machine Turret Lathe

  • Yorktown, Virginia, United States
  • Jun 1st
Boyer Schultz 2AR Tap Holder Screw Machine CNC Turret Lathe 1" Machinist Tool

Boyer Schultz 2AR Tap Holder Screw Machine CNC Turret Lathe 1" Machinist Tool

  • Yorktown, Virginia, United States
  • Jun 1st
Tool Post Holder Raising Brown Sharpe Boyer Schultz Screw Machine Turret Lathe

Tool Post Holder Raising Brown Sharpe Boyer Schultz Screw Machine Turret Lathe

  • Yorktown, Virginia, United States
  • Jun 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies