5 16 washer for sale, brand-new and used.

Brass home brew add a tap kit for ball lock style kegs This is the kit to add a tap to your kegerator or keezer. All parts are commercial grade. The tubing is NSF-brewery approved Bev-flex.

Brass home brew add a tap kit for pin lock style kegs This is the kit to add a tap to your kegerator or keezer. All parts are commercial grade. The tubing is NSF-brewery approved Bev-flex.

New, OEM, stainless steel, 5/16-18 x 7/8" threaded shank, 2 7/16" ID, 4 3/8" overall length, PREWASH drain pipe support. List price $27

This is New Removed from new faucet. This is self Packaged , preventing from dirt and scratches.

31497 New-No Box, CFS 8000025349 Washer, 3-5/16" OD, 1-9/16"ID, 5/8" Wide, . Item is New, unused, no factory packaging. Austin Surplus SKU: 31497 Location: GRG-R09-P17-S03-0006403

142002 New-No Box, Formax A-241 Crank Washer, 2" ID, 3-1/2" OD, 5/16" W, . Item is New, unused, no factory packaging. Austin Surplus SKU: 142002 Location: GRG-R15-P10-S04-A-0000595

(4) 1/4" COATED STEEL CABLE CLAMPS DUAL CLAMPS: CABLES, WIRE BUNDLES, RODS, TUBES, ROPES CARS, TRUCKS, BIKES, MOTORCYCLES, AIRPLANES, BOATS, SHOPS, HOMES, RECLINERS, GYM, SPORTS, LAWN EQUIPMENT, and PLUMBING for ELECTRICAL, COMPUTER, MECHANICAL, LIFTING, TOWING, PLUMBING for CABLES, WIRES, ROPES, RODS, and TUBES New old stock (NOS). Strong, versatile Steel Cable Clamps, Dual Cable Clamps, to secure 1/4" diameter cables, wires, tubes, rods, ropes (works well with diameters of 3/16" - 5/16").

Search Shop:

LOT of TWO ALBION Heavy Duty Swivel Casters (The same as COLSON Series 4. Cat.

5 Vintage Instrument Panel Pilot Lamp Light Amber Green Clear Lens Five vintage pilot / indicator lamps. Three have faceted 1/2" lenses in amber, dark amber and green. One has a 5/8" by 5/8" tall clear lens and one has no lens.

Vintage Large Dialco 11/16" Smooth Frosted Red Glass Lens Panel Indicator Lamp Light Dialco panel indicator lamp. Large 11/16" red glass lens is smooth on the outside, frosted on the inside. Note that the color (as viewed with the naked eye) is a darker shade of red & brighter than what the photo's show.

Vintage Large Dialco 11/16" Smooth Frosted Green Glass Lens Panel Indicator Lamp Light Dialco panel indicator lamp. Large 11/16" green glass lens is smooth on the outside, frosted on the inside. Note that the color (as viewed with the naked eye) is a darker shade of green & brighter than what the photo's show.

TO SKYNON'S TOOLS!

This listing is for one lot of 125 square washers 2" wide by 2" long 3/16" thick 5/8" hole in center unfinished steel Measurements are approximate. Hardware is brand new. See other listings for various sizes and styles.

This listing is for one lot of 50 square washers 3" wide by 3" long 5/16" thick 7/8" hole in center unfinished steel Measurements are approximate. Hardware is brand new. See other listings for various sizes and styles.

Annovi Reverberi VXT 3G.16 You are bidding on One Used Annovi Reverberi VXT 3G.16 Pressure Washer powered by one Briggs and Stratton 5-Horsepower 4-Stroke Gasoline Engine. The engine turns over easily and has good compression. We just replaced the spark plug in it while trying to get it to run.

These are brand new and sealed in the package. They are fairly universal and fit most office chairs sold at Target, Walmart, OfficeMax, Office Depot, Staples, etc. The stem is 1" tall.

For sale here is a brand new set of machined 304 stainless steel tubing spouts. These spouts are made for a 5/16" tap hole as well as for connecting 5/16" tubing to them to be used with any gravity or vacuum system as well as with a drop line for adding a second tap into a bucket or a sap sack. They are machined from 304 stainless steel and have a solid shoulder machined into the spout shaft with a holding washer (also 304 stainless) that is pressed on from the back side.

For sale here is a set of 20 brand new 5/16" diameter stainless steel maple sap / syrup spouts / spiles that are made to use with buckets. They are machined from 304 stainless steel and have a holding washer (also 304 stainless) that is pressed onto the spout from the back side up to a shoulder that is machined into the spout shaft for a solid holding ring.