2036D5F.1.48 New Self Drilling Hex Washer Head Screws, Size #12 x 1.5", Zinc Plated, Part Number Unknown. Each bid quantity is for a Lot of One Hundred Fifty (150) Screws. You may bid / buy any number of lots, up to the total quantity available above.
40 pcs hex washer head tek 5 screws. These are zinc plated self-drilling sheet metal screws with an extra long drill point tip and are threaded from the top of the tip to the bottom of the hex head. Hex teks 5 have a longer drill tip than regular hex teks.
Thread length 13/16 in Fastener shank length 1-1/16 in Base materials Concrete Washer size 5/16 in Material composition Carbon steel shank HRC 53.5 Point type Ballistic
These screws are used to screw light guage steel, galvanized or aluminum roofing panels (24ga - 14ga) to a structural purlin. They are made from case hardened heat-treated carbon steel. They are 5/16 wide by 1" long, #12 thread, have a self sealing washer and have a self drilling point and use a 3/8" standard screw bit.
Lot of 50 like new steel bolts 5/16" X 2 1/2" NC-18 threaded 2" with 7/16" or 11mm hex head with built in 7/8" washer black powder-coated steel. Grade unknown/unmarked
(10) STEEL 3/8"-16 HAT NUTS / FLANGED NUTS T-NUTS / TEE NUTS / CAP NUTS / SERRATED NUTS New old stock (NOS). 3/8"-16 TPI Flange Nuts / Hat Nuts / Cap Nuts / T-Nuts / Tee Nuts / Serrated Nuts - goes by many names. These steel flanged nuts are really great for multiple uses.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.