5 Vintage Instrument Panel Pilot Lamp Light Amber Green Clear Lens Five vintage pilot / indicator lamps. Three have faceted 1/2" lenses in amber, dark amber and green. One has a 5/8" by 5/8" tall clear lens and one has no lens.
THIS IS A 115V, 3.5 AMP, 60 Hz DISC GRINDER. IT HAS AN 8 FOOT CORD. IT INCLUDES A 3" RUBBER PAD WITH NUT & THE NUT WITH GROOVED SPINDLE WASHER FOR USING A GRINDING DISC ONLY.
Vintage Large Dialco 11/16" Smooth Frosted Red Glass Lens Panel Indicator Lamp Light Dialco panel indicator lamp. Large 11/16" red glass lens is smooth on the outside, frosted on the inside. Note that the color (as viewed with the naked eye) is a darker shade of red & brighter than what the photo's show.
Vintage Large Dialco 11/16" Smooth Frosted Green Glass Lens Panel Indicator Lamp Light Dialco panel indicator lamp. Large 11/16" green glass lens is smooth on the outside, frosted on the inside. Note that the color (as viewed with the naked eye) is a darker shade of green & brighter than what the photo's show.
I am selling a nice CLEAN keg spear that fits the standard domestic sankey 15.5, 7.75, and 5.16 gallon kegs. This beer pickup tube is solid stainless steel and worked great when removed. I am also including the gasket o-ring and the stainless steel snap ring(expanding clip washer).
This listing is for one lot of 125 square washers 2" wide by 2" long 3/16" thick 5/8" hole in center unfinished steel Measurements are approximate. Hardware is brand new. See other listings for various sizes and styles.
This listing is for one lot of 50 square washers 3" wide by 3" long 5/16" thick 7/8" hole in center unfinished steel Measurements are approximate. Hardware is brand new. See other listings for various sizes and styles.
Annovi Reverberi VXT 3G.16 You are bidding on One Used Annovi Reverberi VXT 3G.16 Pressure Washer powered by one Briggs and Stratton 5-Horsepower 4-Stroke Gasoline Engine. The engine turns over easily and has good compression. We just replaced the spark plug in it while trying to get it to run.
These are brand new and sealed in the package. They are fairly universal and fit most office chairs sold at Target, Walmart, OfficeMax, Office Depot, Staples, etc. The stem is 1" tall.
For sale here is a brand new set of machined 304 stainless steel tubing spouts. These spouts are made for a 5/16" tap hole as well as for connecting 5/16" tubing to them to be used with any gravity or vacuum system as well as with a drop line for adding a second tap into a bucket or a sap sack. They are machined from 304 stainless steel and have a solid shoulder machined into the spout shaft with a holding washer (also 304 stainless) that is pressed on from the back side.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.