These are 3/32" rivet drills( Actual size: # 40-(.098") Great quality American made HSS drill bit. Made for Boeing by tool companies like Chicago Latrobe, Union Butterfield and Precision Twist Drill. They are all 5" to 6 " long and have a Boeing .300 Quick Change shank, which can also be used in any conventional drill chuck 5/16" or larger.
These are 5/32" rivet drills( Actual size: # 20-(.161") Great quality American made Colbalt HSS drill bit. Made for Boeing by tool companies like Chicago Latrobe, Union Butterfield and Precision Twist Drill. Theyare all 5" to 6 " long and have a Boeing .300 Quick Change shank, which can also be used in any conventional drill chuck 5/16" or larger.
Lot of 10 5/32" (.156") 12 inch Extension Drill bits Made for use in quick change drill motors but can be use in chuck drills also *Resharpened for Boeing by US Tool Co.* *Surplus Aviation* *135 Degree Split Point for Superior Drilling Capability* *High Quality High Speed Steel - You won't find these in your average hardware store!* *These cost Boeing over $12.0
The HP-2 is the largest selling hand rivet tool in the industry. Known and trusted for durability, quality and performance, the HP-2 is often copied but never equaled. It's square shoulder fulcrum pin of cold-formed heat treated steel prevents pin rotation that can elongate the engaging holes and cause premature tool failure in imitation tools.
iGaging 3 Pcs. Premium Engineer Machinist Woodworking Square Set This handy set is great for setting up and checking machines and projects for extreme accuracy to 0.00063". They're made from precision ground and hardened carbon tool steel all are guaranteed to be within .001" flat and parallel.
Atlas Copco RRH-06P Recoiless Rivet Gun Air Hammer This riveting gun is in excellent working condition. There are some engraved markings on the riveting gun such as initials and the cross.
Aluminum Angle 1.25 x 1.25 x 48 in, 1/16 in thick, NEW!, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 1.25 x 1.25 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, and sometimes from our truck.
Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.
Aluminum Angle 3/8 x 3/8 x 48 in, 1/16 in thick, NEW! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/8 x 3/8 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, FL, and sometimes from our truck.
Aluminum Angle 1-1/2” x 1-1/2” x 21.5 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – These are left over from a project. The length varies from 21.5 to 22in long.
Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 1/2 ” x 1/2 ” x 24 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength Description – This angle is a higher strength / anodized version of our popular 3/4in aluminum angle. Almost everything about it is better. It is substantially higher strength, higher corrosion resistance, and lighter weight.
Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.
Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.