This is a real nice original cast iron pulley for an International Harvester 1 1/2-2 1/2 or 3-5hp LA or LB gas engine. It is part number 3591-D and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 5 inch face and is 4 3/4 inches in diameter.
CNC Engraving Machine Accessory 5M Timing Pulley Belt Set Kit Reducer Ratio 2:1 - Timing Pulley Sizes are 30teeth with 10 mm bore and 15 teeth with 6.35mm Bore- The Pulley width is 16mm- Belt Length is 300mm with 60 teeth - Belt Width is 15mmNOTES: - The small timing pulley is also available with a 6mm or 8mm bore size... leave a note when ordering if you want a different bore size... if you don't leave a buyers note you will receive a 15 tooth with 6.35mm Bore small pulley!!!
This is a real nice original cast iron pulley for an International Harvester 1 1/2hp Type M engine or a 1 3/4hp International Harvester Mogul engine. It is part number 969T and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 5 inch face and is 6 inches in diameter.
This is a real nice original cast iron pulley for an Ottawa hit and miss or throttle governed gas engine. At least I'm pretty sure it is for an Ottawa...if it isn't please educate me. It is in excellent condition with no cracks, breaks, or repairs of any kind.
This is a vintage early 1900's industrial manual/catalog from Sprout, Waldron and Company (Muncy, PA) showcasing their friction clutches for belt and pulley systems. This 32 page, 4.5" x 7" catalog has foxing and staining throughout, rusted staples and a crease in the front cover. No writing or tears.
This is an original cast iron pulley for a Fairmont railroad speeder car gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind except for a separation on the raised edge. This should be an easy repair or it would also be easy to remove the raised edge.
Genuine U.S. Military Issue Surplus Four Groove - V-Belt Pulley (NOS) NOS = New Old Stock We have no idea who made this pulley or what it fits on. On the pulley it has the following....
New without Box 5" Single Belt SDS 1AF Pulley/Sheath with Mounted Bushing UP FOR AUCTION/SALE IS AN UNUSED 5.0 X 1B SDS TYPE 1AF PULLEY/SHEATH WITH MOUNTED BUSHING. THE SINGLE BELT PULLEY MEASURES 5.375" DIAM WITH A 2.125" BORE. THE SPLIT KEYED BUSHING HAS A 7/8" BORE AND HAS STAMPED "SDS 7/8 RWE".
YOUR PARTS DUDE GOOD STUFF & TREASURES YOU ARE LOOKING AT WOODS 5V Heavy Duty Sheave 13.20'' OD 5-Groove V Belt pulley with a 2.5'' keyed bushing 5v132-5 Ye
Here is little used only a few mounths on a motor its a A-belt Maska 5.95 tapered bore L bushing cast iron single grove pulley its looks like its new but the grove has the paint removed and a little rust from sitting on bench but will rub right off .
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
