5 in 1 paint tool for sale, brand-new and used.

Offering a Crouse & Hinds Hazardous Locations Fluorescent Light, model The Illuminator, EVFT24320. RETAIL COST IS well over $6000.00 if purchased new. Auction includes The Illuminator Fluorescent Light with matching aluminum Cart.

Learn the 10 specific reasons why over 14,000 customers have purchased a FenderSplendor Coating Thickness Gauge (Mil Gauge) in the last 15 years. See why the FS 502 is your absolute best choice in a hand held thickness gauge. Also, learn how you

Offering a Crouse & Hinds Hazardous Locations Fluorescent Light, model The Illuminator, EVFT24320. RETAIL COST IS well over $6000.00 if purchased new. Auction includes The Illuminator Fluorescent Light with matching aluminum Cart.

you are bidding for one one pentek roto-peen scaler 30336. if the listing says 2 available, you are getting the one in photos 1-4, if the listing says 1 available, you are getting the one in photos 5-9. neither appears to have been used more than 2 minutes, if at all.

you are bidding for one if the listing says 2 available, you are getting an unused, old stock graco 226-086 lid with a 12" ID (suitable for 5 gallon bucket diameter) lid with an unused old stock gast pneumatic motorized mixer motor.with variable speed adjustment valve photos 1-5. if the listing says 1 available, you are getting a used unit, same details photos 6-10. both work great.

Used Working Binks High Pressure Paint Heater Explosion proof. Class 1 Group D 120 VAC 19 Amps 2250 Watts 3000 psi max working pressure 3/8" NPT Ports Turns on-off with switch. Adjusts temperature Light works Temp gauge works (not sure of accuracy) Heats up and pegs the temp gauge (with compressed air flowing through Outside has overspray and looking through the outlet you can see paint build up inside

Test Equipment :

Powder Coating System This easy-to-use powder coating gun provides a finish that is tougher than conventional paint. Coat cars, trucks and airplane parts with even cover and easy clean up. Just fill the tool with any standard powder coating paint and you’re ready to go.

NO SHIPPING TO CALIFORNIA, HAWAII, PO BOXES, nor APO Addresses This listing is for 1 - 5 Gallon Pail of Matte Gunmetal Gray Plasti Dip by Performix & The DYC DipSprayer System Dipit N Ripit Plasti Dip Gallons (Sprayable) ** Product Tips: - When using White or Red - we always suggest a Gunmetal Grey base to ensure product performance. - When dipping a white car, use a Gunmetal Grey base coat under any color - Pre-thinned for use in HVLP type spray system Features:

THIS AUCTION IS FOR A GOOD USED GRACO MAGNUM PRO X7 AIRLESS SPRAYER. THIS ISN'T A CHEAP SPRAYER YOU GET AT WALMART!! COMES WITH NEW 25' SPRAYER HOSE!

Walcom GENESI SP GEO (W6317) paint spray gun pressure feed. SUGGESTED RETAIL: $578.00 YOUR COST: $289.00 you save 50%

Walcom SLIM I HVLP (W3317) paint spray gun with 1000cc bayonet SUGGESTED RETAIL: $308.88 YOUR COST: $154.50 you save 50%

EP270 ne

I used one of these to remove polyethylene from a concrete floor and i t did an exceptional Job. It did not damage the concrete at all. what would have taken days only took four hours.

Hilti DX 76-MX Semi-Automatic Powder Actuated Tool Condition: "NOS" New old stock from equipment rental inventory, remained in storage and never put into service. Body has stock # etched onto one side and some dark blue security paint on underside. Case also has stock # written in marker and blue security paint marking.