5 inch bore hydraulic cylinder for sale, brand-new and used.

This SHEFFER HYDRAULIC CYLINDER 1.5" INCH BORE 5" STROKE is a hydraulic or pneumatic cylinder with a 1.5" bore and an overall length of 5". SDWs.c.3shelf17

For sale is one Enerpac RC-210 50 Ton hydraulic cylinder with max working pressure of 10,000 psi. It has a 3.5 inch diameter cylinder with a stoke of 5 3/4 inches (** measured stroke is ~5 3/4 inch however makings on cylinder wall indicate up to 6") The cylinder is missing the hardened saddle that sits on top of the cylinder and the paint has seen some wear and tear however the sides of the piston are rust and damage free as is the base.

This Hydraulic Cylinder Jack has been on the shelf in an outbuilding for many years and I don't know if it's new or re manufactured, It has a 1/4" pipe NPT hole in both ends, still the original plugs in them, It's made by Ortman Miller Mach Co. Inc. Hammond Ind.

NEW CHIEF HYDRAULIC CYLINDER. PART NUMBER 207-428 IT IS;3 INCH BORE4 INCH STROKE1-1/2 ROD12 INCH RETRACTED16 INCH EXTENDEDSAE8 PORT SIZE1 INCH PIN HOLES3.500 OUTSIDE DIAMETER0.187 THICK WALLS

Up for sale is a new, unused, Eaton Hydraulics 8" bore X 10" stroke cylinder from military surplus stock. Item weighs 125lbs. Always happy to combine shipping charges as well on multiple items, just send me a destination zip code and I will figure the shipping charges before you check out.

Parker Hydraulic Actuating Cylinder S-73141 3040-01-019-2930 NEW New. Stored by US Military. Has minor shelf wear, marks, labels, tape, and/or patina from US Military storage.

Hydraulic Cylinder Assembly P/N S-73141 See Photos for details 3040-01-019-2930 3040

SquareTrade © AP6.0

This is a NEW OPEN BOX ITEM. It has been inspected for quality and is in perfect condition. 100% satisfaction or money back guaranteed.

Auctioning off 1 Lot of parker hydraulic cylinders You Get- Quantity of 13 - Parker model JB2HLT24A hydraulic cylinder. These cylinders have 2" bore and 6" stroke. Max working pressure of 3000 psi.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos

Gardner Bender KC3540 Slug-Out Knockout Converter 3-1/2" and 4" (8.89 and 10.16 cm) Brand New in the box - old stock item INCLUDES: • (1) Converter FEATURES: • For use with 3-1/2" to 6" punches and dies • Eliminates the need for spacers • Helps to center the hole • Requires 1.5 inch guide hole SPECIFICATIONS: • For use with 3-1/2" to 6" punches and dies • Requires 1.5 inch guide hole Use the Gardner Bender KC3540 Knockout Converter whenever you need to create larger punch sizes (3.5 to 6 inch).

15 ton press head used for nibbing standing vertically as shown And upsetting wire in horizontal position on a Refflinghaus wireforming machine. 5 inch bore x 1/2 inch stroke Milwaukee Cylinder, rated 1500 lbs max psi. Approx weight 150 lbs Will crate for LTL carrier for $ 50

NORGREN Hydraulic Cylinder TypeDouble Acting

Numatics hydraulic cylinder, 5/8" shaft/6" shaft exposed at rest, 9.5" extended=3.5 inch stroke 3"x4 5/8" mounting plate with (4) .338" holes on shaft end, 1/2" clevis pin on opposite end Please contact me if you have questions about this item. Thanks for looking.

2.5" x 8" stroke hydraulic cylinder. 1 fixed and 1 ball style end--both with 1 1/4" bore. 1 3/8 inch rod#6 SAE fittings.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos