5 of 1750 for sale, brand-new and used.

UP FOR SALE EXHAUST FAN , HERE ARE THE SPECS : Type

UP FOR SALE HOT WATER CIRCULATING PUMP , HERE ARE THE SPECS :

Inventory #: CP2094 Style: Horizontal Manufacturer: Worthington Model #: 2CNG74 HP: 1 RPM: 1750 Volts: 230/460 Inlet (inches): 2 Outlet (inches): 1.5 Serial Nbr.: Y869776 Stainless steel pump, 8" diameter impeller. For shipping and handling arrangements, please call Lanco Corporation @ 616-887-8300 or toll free @ 888-248-8500.

has a 15 gallon tank max psi is 3800 has a general electric 3 HP induction motor PH 3 volts 208-220/240 cycles 50: rpm 1455 amp 10.8/5.4 deg c rise 50 service factor 1 cycles 60: rpm 1750 amp 9/4.5 deg c rise 40 service factor 1.15

Consolidated SS Cap Elevator with SS Hopper, 12" Cleated Incline Conveyor Model FEH-15 Serial #729392 Incline conveyor is 12’ Long SS construction MS legs 12” wide cleated belt – some cleats are broken SS Hopper – 40” x 46” x 28” Deep with SS Top SS discharge chute 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottle caps Belt is showing signs of wear Last used in a water bottling plant Good Condition !! For More Information, EMAIL

Empty Bottle / Cap Elevator Feeder with SS Hopper, 12" Incline Conveyor Previous client never installed belting on conveyor NO BELT on Conveyor - 12” wide incline conveyor SS Hopper – 58” x 58” wide x 66" Deep 110" discharge height SS discharge chute Fork pockets mounted on base 0.5 hp / 1750 rpm SEW Motor Unit was purchased for feeding empty plastic bottles NO Belt on Conveyor Excellent Condition !! For More Information, EMAIL

Palace Cap Bottle Elevator Feeder with SS Hopper, 8" Cleated Incline Conveyor SS contact parts 8” wide cleated incline belt SS Hopper – 32” x 30” wide x 32" Deep Hinged access top on hopper 78" discharge height SS discharge chute Adjustable leg levelers 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottles Last used in a small food plant Excellent Condition !! For More Information, EMAIL tesa

24” Wide x 6’ Long SS Food Grade Sorting Stacking Conveyor Mfg by APS Conveyor Sorting and Stacking Conveyor with Multiple belts Food grade beltLower Sorting station : - Outer belt #1 - 9” wide, cleated - Outer belt #2 - 9” wide, cleated - Center belt – 6.5” wide, cleated belt, driven from downstream conveyor, belt not included - 34" elevation Upper Stacking Area : - (2) 8" Cleated belts - 36” infeed elevation SS Construction SS Adjustable guide rails SS Legs - adjustable floor lev

22" x 8' Long Case Separation Conveyor, Metering Conveyor (2) 18" wide x 48" Long belts22" BF (between frames) Length - 8' No legs - unit wa used prior to feeding a Palletizer 1.5 Hp drive / 1750 rpm with gear box Electrical 208/230/460 Volt / 60 Hz / 3 Phase

2009 Hoppmann EP08 SS Cap Feeder with Speed Controller Model #EP08/08 Serial #003046 2009 Year of Mfg. Last running ROPP aluminum caps SS Construction 8” cleated belt, 2" cleats on 6" centers SS Hopper - 38" x 40" x 20" Deep Pivoting elevation 96" discharge elevation (adjustable) Low cap sensor Hinged access top on hopper SS

Equipment Express Waterfall Cap Sorter/Feeder Unit feeds and sorts caps for capping machinesLast running 24 mm plastic screw caps for energy shotsCapable up to 53 mm caps7.5” cleated beltMinarik speed controller Air assist featureCap Hopper - 24” x 24” x 20” Deep Adjustable discharge cap chuteCasters for mobilityAdjustable leg levelers0

Vickers Integrated Motor Pump Model No. MP22-B1-L-P74CM-A-F1-20-S11 Assy. No.

Progressing cavity pump McKenna engineering 

WESINGHOUSE 05-15H4 TBEP3SKB MOTOR 15 HP 1755 RPM 254T FRAME 230/460 VOLTS 3PH 39/19.5 AMPS