5/16 3 flute end mill for sale, brand-new and used.

This is an older unit, used very little. Base measures 2" X 3.5" total.Vertical surface is about 2 X 2 and the angled surface is 2 X 1 11/16.It has a 3/4" bore in the work holder with a 5/8" sleeve and a 1/2" sleeve.Indexes for 2 or 3 or 4 flute.Condition is goodShipping is free.

These are re grinds from a machine shop. They were leftover from a job no longer ran. No chipped flutes, tips are sharp not radiuses.

Up for grabs is a huge lot of machine end mills, till bits, inserts, and reamers. Included is the following: 1. 5 new Super Morse br12883 carbide tipped single point lead angle turning tools size 3/4 2.

morse nos endmill 1/4, 1/2 tap 5/16-24 nf gh3 5/16-18 nc gh2 1/4-20 gh2

SOLID CARBIDE 5/16" X 3/4" X 2-1/2" OAL 2 FLUTES SINGLE END MILL. Radius Corner. Condition is Good, needs light sharpening.

CONDITION = NEW MANUFACTURER = HANITA (ISRAEL) MATERIAL = HIGH SPEED STEEL DIAMETER = 3/16" (.1875") FLUTE LENGTH = 5/16" OVERALL LENGTH = 2" SHANK DIAMETER = 3/16" NUMBER OF FLUTES = 2 HELIX ANGLE = STANDARD 30 DEGREE RIGHT HAND END TYPE = DOUBLE SQUARE CENTER CUTTING = YES

Accupro - 5/16 Inch Diameter, 1/2 Inch Length of Cut, 3 Flutes, Solid Carbide Single End Square End Mill ZrN Coated, 2-1/2 Inch Overall Length, 5/16 Shank Inch Diameter, Spiral Flute, 37 Helix Angle, Centercutting

INDEXABLE END MILL MADE BY FETTE GERMANY INDEXABLE END MILL CONDITION = NEW THIS IS POSITIVE RAKE INDEXABLE END MILL COOLANT THROUGH ACCEPTS ANY CCMT-32.5_ (1) CCMT-32.51 TIN COATED INSERT

2pcs 18.5mm Three Flute HSS Aluminium End Mill Cutter CNC Bit D1=18.5mm , D=16, L1=32mm , L=92mm

2pcs 15.5mm Three Flute HSS Aluminium End Mill Cutter CNC Bit D1=15.5mm , D=16, L1=32mm , L=92mm

5pcs 14.5mm Three Flute HSS Aluminium End Mill Cutter CNC Bit D1=14.5mm , D=16, L1=32mm , L=92mm

2pcs 16mm Three Flute HSS Aluminium End Mill Cutter CNC Bit D1=16mm , D=16, L1=32mm , L=92mm