5/8 full thread bolt for sale, brand-new and used.

This is a newly machined 47/37 transposing gear set which converts your 8 TPI lead screw to a 2.5 mm pitch. The thread’s crest-to-crest or lead error is only 0.02% or about 0.0025 inch for a one-foot long threaded rod. The transposing gears are under 3 inches in diameter leaving lots of room for closing the gear cover.

May be used as a spindle-adapter for a wood lathe from LatheCity

Hilti KWIK Bolt TZ Expansion Anchor- 15 PER BOX Stainless steel Product Details: Especially Suited for Seismic and Cracked Concrete Applications Seismic Qualifications Tested in Accordance with ACI 355.2 and ICC-ES AC193 Small Minimum Edge Distance and Spacing for Maximum Design Flexibility Nuts and Washers are Pre-Assembled Rounded End for Easy

Hilti KWIK Bolt 3 Expansion Anchor - 304 Stainless Steel - KB3 5/8" x 10" - 282563- Box of 15 Box is torn but anchors, bolts and washers are in tact. Never used Product Description Hole Diameter: 5/8 in Anchor Length: 10 in Thread Length: 7 in Allowable Loads (Greater Than/Equal To 4000 psi Concrete): Embed Depth: 4 in Tension (lb): 3340 in Shear (lb): 4625 in For Base Materials: Lightweight Concrete, Uncracked Concrete, Lightweight Concrete over Metal Deck, Grou

This listing is for a complete stump grinder kit that you can assemble and install on your excavaor, skid steer loader, front-end loader, tractor or backhoe. It includes a heavy angle mount which bolts to your machine. It will have five foot long hydraulic hoses with a male and female flat face connector for the ends.

You are bidding on a K&E Tools 1/2'' Square Drive Super-Duty Air Impact Wrench Model KW-14HP. May have cosmetic blemishes from age or use but in good working condition! Maximum Torque (Ft-Lbs.):425, Working Range (Ft-Lbs.):30 - 275, Free Speed (RPM):5,600, Impacts per Minute:1,200, Standard Bolt Capacity:5/8 inch, Weight (Lbs.):6.9, Length:7-9/16 inch, Average Air Consumption:4.4 CFM, Recommended Hose Size:1/4 inch, Thread Size (N.P.T.):1/4 inch, Sound (dB A):85.

K&E Tools 1/4 Inch Quick Change Hex Air Impact Driver Model KW-7PD Double Hammer Features Oil bath clutch runs cooler and quieter and dramatically improves durability Most powerful on the Market Muffled Handle Exhaust only 77.5dB (A) Comfortable elastomer grip fits comfortably in hand Excellent choice for assembly Combines the best of po

CP5000 1" Super Duty Air Impact Wrench •Strongest and most powerful 1" impact with extended anvil available •Four position power regulator •Controllable throttle provides e

Very nice barely used Ridgid 811A universal quick self opening die head 1/8" to 2" with like new 1" to 2" dies included. It is also the new style that is ported for oil to flow thru the head. I will also include a set of used universal bolt dies for 5/8x11 thread.

eBay Template v2.5

THIS LISTING IS FOR A VERY NICE ENERPAC RC-506. HAS 50 TON CAPACITY AND A 6-1/4" STROKE. TESTED AND INSPECTED THE UNIT.

THIS LISTING IS FOR A 25 TON HYDRAULIC CYLINDER WITH A 8" STROKE. UNIT IS NEW WITHOUT ORIGINAL SHIPPING BOX. THE UNIT IS THE SAME AS ENERPAC RC258.

NEW UNUSED NEW UNUSED WITH FEW SCUFFS,SCRATCHES,ETC FROM WAREHOUSE OUT OF BOX SEE PICTURES. NON ORIGINAL PACKAGING PARKER MODEL: 110A-106-AS-0-F Hydraulic Motor 110A series uses a virtually failure proof single piece shaft.

UNIT IS NEW IN THE ORIGINAL BOX ENERPAC RC-50 Cylinder, 5 tons, 5/8in. Stroke L ENERPAC Item Specifics ItemSingle Acting Cylinder TypeGeneral Purpose Capacity (Tons)5 IncludesCoupler, Dust Cap ItemHydraulic Cylinder Material of ConstructionSteel Oil Capacity (Cu.-In.)0.62 Outside Dia.2.31" Outside Dia. (In.)2.31 Plunger Dia.

Hydraulic Cylinder, Single Acting, Spring Return, Steel, Weight Capacity 15 tons, Stroke Length 1 In., Effective Area 3.14 sq. in., Max. Pressure 10, 000 psi, Oil Capacity 3.14 cu.

This listing is for a very nice enerpac RLC-1002. This unit has been throughly examined, tested and is ready for service. As always its guaranteed.