Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength Description – This angle is a higher strength / anodized version of our popular 3/4in aluminum angle. Almost everything about it is better. It is substantially higher strength, higher corrosion resistance, and lighter weight.
Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
Aluminum Angle 5/8” x 5/8” x 48 in, 1/16 in thick, 5/8 IN x 5/8 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Offset Angle 1” x 2” x 48 in, 1/16 in thick, 1 IN x 2 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 2” x 2” x 48 in, 1/16 in thick, 2 x 2 in, NEW!, Angles Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick. They measure 2 x 2 x 48 inch.
For pricing or shipping discounts, combination orders, volume discounts, purchasing over the phone, or general information please call me on my cell at: (six, seven, eight,)-(two, zero, zero)-(zero, eight, six, two). Aluminum Angle 1/2 ” x 1/2 ” x 48 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – When
5/8" Square, 6061-T6 Aluminum bar stock, lengths range from 15" to 17" long. Hundreds available!!! 10 Piece Minimum Purchase, except for local pickups.
Key Features: These are 500pc blank glass microscope slides and 1000pc square coverslips with high quality. The slides and cover slips are pre-cleaned, flat, and optically clear. The dimensions of the slide are 1" x 3" x 1/8" (25.4x76.2x1.25mm) with ground edges and those of the coverslips are 3/4" x 3/4" x 0.006" (18x18x0.13mm).
Key Features: There are 300pc blank glass microscope slides with 300pc square coverslips with high quality. The slides and cover slips are pre-cleaned, flat, and optically clear. Quantity: 300 blank slides and 300 coverslips.
Key Features: This is a 3-3/4" square LED reflecting plate with adjustable brightness. It can be used as a microscope bottom light. This kit comes with one year warranty against manufacturing defects.
Key Features: This is a set of 50pc microscope blank slides and 100pc square cover slips. Quantity: 50 blank slides and 100 coverslips. Dimensions of Slide: 1" x 3" (25.4x76.2mm).
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
