50 deg for sale, brand-new and used.

**LOOK AT PICTURES: MISSING CAP** ENDRESS + HAUSER PROMAG 33 ORDER CODE: 33HP50-FCAEC11D21A SN: 63 852577 TAG# 85-260 VAC 15V A/W 50-60 HZ NEMA 4X TMMAX 265 DEG F USED APPROX SHIPPING WEIGHT: 47 LBS C-9-6 TK INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES, TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEA

MICROMOTION MASS FLOW SENSOR MODEL# T150TR624S1U SENSOR SN: 901537 TEMP RANGE -50 TO 150 DEG C WITH FLOW TRANSMITTER 3700A2A04DUEZZZ SENSOR SN: 901501 3700 S/N: 2184395 VOLT 18-30 VDC FT-3451A USED APPROX SHIPPING WEIGHT: 200 LBS ON SKID SKID TK INTERNATIONAL BUYER-PLEASE NOTE: IMPORT DUTIES, TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRI

SHIPPING IS TO ANYWHERE IN 50 STATES. INTERNATIONAL EXTRAApplication:Residential / CommercialBall Material:BrassBody Inner Diameter:1.500"Body Length:3.670"Body Material:BrassConnection Type:Female NPT x Female NPT Seal Type:PTFESize A:1-1/2"Size B:1-1/2"Specification:CSA, UL, FM, and NSF61Stem Material:BrassStyle:Full PortTemperature:-20[DEG] - 150[DEG]FType:Ball ValveWorking Pressure:600 WOG Product Weight: 5.4384 lbs. Notes:

THESE ARE USED, MELLES GRIOT ROTARY POSITIONERS WITH MITUTOYO MIC'S., NEWPORT AND SUPPER GONIOMETERS AND A FIBER CLAMP. THE ROTARY HAS A 360 DEG. LOCKING ROUGH ADJUSTMENT WITH A 20 DEG.

THIS IS AN ARDEL KINAMATIC, (MANUAL) ROTARY POSITIONER WITH A 2" +_ APPERTURE. IT HAS A TAPPED .25 / 20 HOLE IN THE END OPPOSITE THE MIC AND ONE ON THE SIDE TO THE LEFT OF THE MIC. AS WELL, IT HAS FOUR UN TAPPED HOLES THROUGH THE FACE AT APPROX.

THIS IS A NEW ENGLAND AFFILIATED TECHNOLOGIES BRAND LINEAR POSITIONER WITH A VEXTA MODEL C5858-9012 2 PHASE 4V 1.2A. DC STEPPER / 1.8 DEG./STEP (ALSO HAND ADJUSTABLE). IT HAS A 4.375" TRAVEL WITH A 5" X 2.625" PLATFORM AND A 5" X 3.375" FOOTPRINT.

7 CU.FT. (200 Liter) DAY Nauta Processor Vacuum Dryer/Mixer. Sanitary Design Used approx.

var arICImages7 = new Array(6); arICImages7[0]='http://d3d71ba2asa5oz.cloudfront.net/82000055/images/k47h027-1.jpg'; arICImages7[1]='http://d3d71ba2asa5oz.cloudfront.net/82000055/images/k47h027-2.jpg

THESE ARE USED, TESTED, WORKING, N.E.A.T. BRAND VERTICAL POSITIONERS WITH ORIENTAL MOTOR BRAND, 5 PHASE VEXTA STEPPING MOTORS MODEL PK569BUA. THE PLATFORMS ARE 7.875" X 7.875" WITH A THICKNESS OF 2.875" WHEN FULLY LOWERED AND AN APPROX.

THESE ARE USED, TESTED, WORKING, N.E.A.T. BRAND VERTICAL POSITIONERS WITH ORIENTAL MOTOR BRAND, 5 PHASE VEXTA STEPPING MOTORS MODEL PK569BUA. THE PLATFORMS ARE 7.875" X 7.875" WITH A THICKNESS OF 2.875" WHEN FULLY LOWERED AND AN APPROX.

THIS IS A USED NEWPORT 471 ROTARY POSITIONER WITH A NEWPORT MICROMETER. IT HAS A 360 DEG. RANGE WITH A 20 DEG.

HONEYWELL LENNOX 25C50 M975A1006, MODUTROL MOTOR 24V 50-60 Hz 27W 160 DEG 40SEC, 25LB-IN TORQUE.

Horizontal Flow Wrappers - Tray Sealer Manufacturer Mettler-Toledo

Tray wrapper Solo Max 647, Autolabeler 706 w/317 printer Mettler film wrapping This is a high speed automatic wrap-weigh-label packaging system made by Mettler Toledo. The system consists of a Solo Max 647 tray wrapper and a Autolabeler 706 and thermal printer 317. System can wrap any size tray from 1S to 10x 14 family packs because it automatically senses incoming product size and makes adjustments accordingly resulting in zero down time when switching between products.

Ingersoll Rand HL901H00AA Dessicant Air Dryer S/N 348960 Dessicant: 50 lbs. 22.7 KG per tower 115 Volt Max inlet air: Pressure 150 PSIG. Temp 120 deg Fahrenheit This is a used Ingersoll Rand De

Wilkerson Refrigerated Dryer Model # WRA-0025-Q54 Rated Flow: 25 SCFM Voltage: 230/50/1 Refrigerant Type: HCFC-22 (R22) Inlet Air Temp: 100 Deg F Inlet Air Pressure: 100 PSIG This item ships LTL - Common Carrier.(1) Skid - 90 Pounds

Gardner Denver Refrigerated Air Dryer. Dries 250 cfm. of air, that is the size of a 50 hp.

M-216: 200 series brass quick connect couplers with 3/8” standard 90 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 200 series male brass plugs.