MagVISE Magnetic Workholding Blocks Custom workholding without the “custom” cost Click on the photo above to watch a short movie showing MagVISE magnetic work holding blocks in action. Quickly load your workpiece Use EZ-Lift lifting magnets together with the MagVISE magnetic workholding system to significantly reduce your load/unload and workpiece set-up times. Machine all 5-sides It’s easy to per
(one) food grade paddle mixer, 60" x 24" x 28" deep inside, 3hp 230/460vac 1750 rpm motor, 57-1 ration gear reducer, approx 4-1 speed reduction thru chain and sprocket. Approx final speed is about 7 rpm. Allen bradley motor starter ( not pictured ) with power cord and plug.
Aluminum Round Tubing – 1.5" OD x 1/16” x 248" Long NEW, .062, 1.5 IN Description – These are a product of our solar panel division. They measure 1.5" OD x 1/16” x 24 inch. I also have this in 24in lengths.
Aluminum Flat Diamond Plate Sheet Stock 1 in x 48 in, 1/16 thick, 1in, 1 in, 1”, New Description –They measure 1 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Diamond Plate Sheet Stock 6 in x 48 in, 1/16 thick, 6in, 6 in, 6”, New Description –They measure 6 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Diamond Plate Sheet Stock 12 in x 48 in, 1/16 thick, 12in, 12 in, 12”, New Description –They measure 12 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Sheet Stock 12 in x 48 in, 1/4 thick, .25in, Bar, USA! Description –This measure 12 x 48 x .25in thick. They are easy to work with and are a 5052 type aluminum, which is basically the same as 6061, just a little easier to work with.
http://www.strima.com/info/pliki/pfaff_folders/PFAFF_3811_e.pdf This machine works great and is ready to sew . Please let us know if you have any questions. 256-229-6595 ext.
Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4995.00 This is a 24"x 49" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.
Thank you for looking! This is a mint-conditioned, ZOLL AED Plus which is currently compliant under the American Heart Association's (AHA) 2005 Science and Guidelines Update. It needs minimal refurbishing and can be brought to the AHA's current 2010 Science and Guidelines Update very inexpensively.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.