+ Post new Ad
5C LEVER COLLET CLOSER, US $240 – Picture 0
5C LEVER COLLET CLOSER, US $240 – Picture 1
5C LEVER COLLET CLOSER, US $240 – Picture 2
5C LEVER COLLET CLOSER, US $240 – Picture 0
5C LEVER COLLET CLOSER, US $240 – Picture 1
5C LEVER COLLET CLOSER, US $240 – Picture 2

5c Lever Collet Closer

US $240

  • Bronx, New York, United States
  • Jan 30th
Open on mobile:
QR code
BRAND NEW 5C COLLET CLOSER.  BOUGHT FOR MY SHARP LATHE MODEL 1440. I THINK IT WILL ALSO FIT ON JET  LATHE. STILL HAS ORIGINAL PROTECTIVE FINISH,  SHIP FREE TO 48 STATES. HAS PARTS LIST.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer CHAN HUI MACHINERY WORKS CO.,LTD
Model 1340
Country/Region of Manufacture Taiwan

Directions

Similar products from Metalworking Collets

USED 1/2 LOGAN 5C COLLET

USED 1/2 LOGAN 5C COLLET

  • Pinellas Park, Florida, United States
  • Jan 30th
PARLEC ER-16 Collet - Series: ER16 Size: .1181 - .1575" (3 - 4mm)

PARLEC ER-16 Collet - Series: ER16 Size: .1181 - .1575" (3 - 4mm)

  • Flushing, New York, United States
  • Jan 30th
USED 7/16 LOGAN 5C COLLET

USED 7/16 LOGAN 5C COLLET

  • Pinellas Park, Florida, United States
  • Jan 30th
Taig 1040-ER 16 Collet Set Works With Any ER-16 Spindle Or Tool Holder

Taig 1040-ER 16 Collet Set Works With Any ER-16 Spindle Or Tool Holder

  • Amarillo, Texas, United States
  • Jan 30th
USED 19/32 LOGAN 5C COLLET

USED 19/32 LOGAN 5C COLLET

  • Pinellas Park, Florida, United States
  • Jan 30th
er20 collet set

er20 collet set

  • Hoffman Estates, Illinois, United States
  • Jan 30th
USED 11/32 SUTTON 5C COLLET

USED 11/32 SUTTON 5C COLLET

  • Pinellas Park, Florida, United States
  • Jan 30th
er32 collet set

er32 collet set

  • Hoffman Estates, Illinois, United States
  • Jan 30th
USED 1/2 Q.A. 5C COLLET, WITH INTERNAL THREADS

USED 1/2 Q.A. 5C COLLET, WITH INTERNAL THREADS

  • Pinellas Park, Florida, United States
  • Jan 30th
5C Collet Stop Set American Made

5C Collet Stop Set American Made

  • Tilton, New Hampshire, United States
  • Jan 30th
CAT 40 END MILL HOLDERS ER16 ER32 TECHNIKS COLLETS CV40

CAT 40 END MILL HOLDERS ER16 ER32 TECHNIKS COLLETS CV40

  • Montville, Ohio, United States
  • Jan 30th
R8 Collects TIR .0007" 25 Piece Set 1/8-7/8" x 32MDS Met Round Collet Set |KR3|

R8 Collects TIR .0007" 25 Piece Set 1/8-7/8" x 32MDS Met Round Collet Set |KR3|

  • Saint Louis, Missouri, United States
  • Jan 30th
(27) Assorted 75TG Collets, 1/8" to 3/4", TG75, Milling, Erickson

(27) Assorted 75TG Collets, 1/8" to 3/4", TG75, Milling, Erickson

  • Hopkins, Minnesota, United States
  • Jan 30th
(17) Assorted ER32 Collets, Tapping, Milling 5/32 up to 25/32

(17) Assorted ER32 Collets, Tapping, Milling 5/32 up to 25/32

  • Hopkins, Minnesota, United States
  • Jan 30th
Hardinge lathe collets 5C

Hardinge lathe collets 5C

  • Waukegan, Illinois, United States
  • Jan 30th
T&O 3/16" ER16 STEEL SEALED COLLET

T&O 3/16" ER16 STEEL SEALED COLLET

  • Flushing, New York, United States
  • Jan 30th
Hardinge #22 B&S 3/4" Hex Feed Finger

Hardinge #22 B&S 3/4" Hex Feed Finger

  • Chicago, Illinois, United States
  • Jan 30th
(15) ASSORTED HARDINGE #11 COLLETS 1/4" - 3/4"

(15) ASSORTED HARDINGE #11 COLLETS 1/4" - 3/4"

  • Chino, California, United States
  • Jan 30th
(15) ASSORTED HARDINGE #11 COLLETS 5/32" - 17/32"

(15) ASSORTED HARDINGE #11 COLLETS 5/32" - 17/32"

  • Chino, California, United States
  • Jan 30th
BURNERD PRECISION MULTISIZE COLLET SET, EB4 TO EB11, MADE IN ENGLAND

BURNERD PRECISION MULTISIZE COLLET SET, EB4 TO EB11, MADE IN ENGLAND

  • Coffeyville, Kansas, United States
  • Jan 30th

People who viewed this item also vieved

Northwestern #13001 1/4-20 Coupling Nut USA

Northwestern #13001 1/4-20 Coupling Nut USA

  • Crystal Lake, Illinois, United States
  • Jun 11th
JERGENS #32305 Plastic Knob

JERGENS #32305 Plastic Knob

  • Crystal Lake, Illinois, United States
  • Jun 11th
Northwestern #13007 3/4-10 Coupling Nut USA

Northwestern #13007 3/4-10 Coupling Nut USA

  • Crystal Lake, Illinois, United States
  • Jun 11th
JH Williams 6" C Clamp #406 Drop Forged Deep Throat

JH Williams 6" C Clamp #406 Drop Forged Deep Throat

  • Youngstown, Ohio, United States
  • Jun 28th
Vintage ~ Clamp Mfg Co. ~ Kant-Twist #421 Clamp ~ 6 Deep ~ So El Monte, CA

Vintage ~ Clamp Mfg Co. ~ Kant-Twist #421 Clamp ~ 6 Deep ~ So El Monte, CA

  • Williamston, South Carolina, United States
  • Jun 29th
1Pcs 30Kg Vertical Toggle Clamp Metal Hand Tool Holding Capacity GH-13009 BDRA

1Pcs 30Kg Vertical Toggle Clamp Metal Hand Tool Holding Capacity GH-13009 BDRA

  • Shenzhen, China
  • Jun 29th
USED 6 Inch 6 JAW BUCK CHUCK AJUST-TRU South Bend Logan 2 1/4-8

USED 6 Inch 6 JAW BUCK CHUCK AJUST-TRU South Bend Logan 2 1/4-8

  • Millbrae, California, United States
  • May 24th
buck adjust-tru 6 inch chuck

buck adjust-tru 6 inch chuck

  • Colorado Springs, Colorado, United States
  • May 24th
BUCK 4 JAW 6" CHUCK Fits South Bend Logan With 2 1/4-8 Spindle

BUCK 4 JAW 6" CHUCK Fits South Bend Logan With 2 1/4-8 Spindle

  • Millbrae, California, United States
  • May 24th
6 x 13/16 x 3/4 Standard Steel Machinable Soft Jaws for 6 " Kurt Vises Vice #4

6 x 13/16 x 3/4 Standard Steel Machinable Soft Jaws for 6 " Kurt Vises Vice #4

  • Petersburg, Virginia, United States
  • May 25th
6 x 1 7/8 x 1 Standard Steel Machinable Soft Jaws for 6 " Kurt Vises Vice #2

6 x 1 7/8 x 1 Standard Steel Machinable Soft Jaws for 6 " Kurt Vises Vice #2

  • Petersburg, Virginia, United States
  • May 25th
6 x 4 x 1 Standard Steel Machinable Soft Jaws for 6 " Kurt Vises Vice #5

6 x 4 x 1 Standard Steel Machinable Soft Jaws for 6 " Kurt Vises Vice #5

  • Petersburg, Virginia, United States
  • May 25th
Emco Unimat SL1000 & DB200 Dead Center

Emco Unimat SL1000 & DB200 Dead Center

  • Buffalo Grove, Illinois, United States
  • May 26th
4MT CNC THREADED DEAD CENTER ROYAL PRODUCTS 11531, 1-1/4-14

4MT CNC THREADED DEAD CENTER ROYAL PRODUCTS 11531, 1-1/4-14

  • Glendale, Arizona, United States
  • May 26th
General # 164 Threading Tap Wrench

General # 164 Threading Tap Wrench

  • Coventry, Rhode Island, United States
  • May 26th
SGP 3-Prong Black Tri-Type Hand Knob 1/4" USG

SGP 3-Prong Black Tri-Type Hand Knob 1/4" USG

  • Roanoke, Virginia, United States
  • Jun 2nd
U.S. Best Cast Aluminum C Clamp Bracket Holder Adapter

U.S. Best Cast Aluminum C Clamp Bracket Holder Adapter

  • Middlebury, Indiana, United States
  • Jun 2nd
Ellis Dividing Head with 9B Collet Chucking (Inv.34883)

Ellis Dividing Head with 9B Collet Chucking (Inv.34883)

  • Portland, Connecticut, United States
  • Jun 2nd
Pratt & Whitney 36" Tilting Rotary table (Inv.16738)

Pratt & Whitney 36" Tilting Rotary table (Inv.16738)

  • Portland, Connecticut, United States
  • Jun 6th
Lapointe 36 in. Hydraulic Index Table (Inv.16849)

Lapointe 36 in. Hydraulic Index Table (Inv.16849)

  • Portland, Connecticut, United States
  • Jun 6th
HAAS 5C ROTARY TABLE INDEXER MOTOR SUPERIOR ELECTRIC STEPPER GUARANTEED TO WORK

HAAS 5C ROTARY TABLE INDEXER MOTOR SUPERIOR ELECTRIC STEPPER GUARANTEED TO WORK

  • Santa Clarita, California, United States
  • Jun 6th
Magnetic MSC V Block Set 3-3/16" x 2-3/8" Model #01292390 MSRP $300

Magnetic MSC V Block Set 3-3/16" x 2-3/8" Model #01292390 MSRP $300

  • Venice, Florida, United States
  • Jun 6th
Brown & Sharpe 3/4" to 1 3/4" Parallel Set 1/4" Thick (8 Pairs)Missing 1 1/4 Pr

Brown & Sharpe 3/4" to 1 3/4" Parallel Set 1/4" Thick (8 Pairs)Missing 1 1/4 Pr

  • Venice, Florida, United States
  • Jun 6th
Fowler 52-475-555 Hard steel V-Block Set 2" Clamp Cap 2" H x 2.25" L x 2" W i

Fowler 52-475-555 Hard steel V-Block Set 2" Clamp Cap 2" H x 2.25" L x 2" W i

  • Venice, Florida, United States
  • Jun 6th
SCM Global ER11 Collet Chuck with 5/8" Diameter x 6.48" Length Straight Shank

SCM Global ER11 Collet Chuck with 5/8" Diameter x 6.48" Length Straight Shank

  • Mount Vernon, Ohio, United States
  • Jun 9th
HARDINGE 7/16'' STOP COLLET 22SC *NEW IN BAG* *LOT OF 2*

HARDINGE 7/16'' STOP COLLET 22SC *NEW IN BAG* *LOT OF 2*

  • Sterling Heights, Michigan, United States
  • Jun 9th
UNIVERSAL ENGINEERING MIACRON 40 TAPERED COLLECT CHUCK WITH COLLETS

UNIVERSAL ENGINEERING MIACRON 40 TAPERED COLLECT CHUCK WITH COLLETS

  • Billings, Montana, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies