5hp single phase motor for sale, brand-new and used.

CEWDM3550 1.5HP, 3500RPM, 3PH, 60HZ, 56, C, 3528M, TENV, F

STOCK PHOTO, PICTURE IS NOT ACTUAL ITEM VEM31120 1.5HP, 3490RPM, 3PH, 60HZ, 56

EFM3709T 7.5HP, 3520RPM, 3PH, 60HZ, 213T, 3728M, TEFC, F

CEM3769T 7.5HP, 3510RPM, 3PH, 60HZ, 213TC, 0726M, TEFC

EJMM3554T 1.5HP, 1760RPM, 3PH, 60HZ, 145JM, 3526M, TEFC

Invertek ODE-2-11005-1HB12-01 Variable Frequency Motor Drive This VFD has been refurbished and/or tested after little to no use in the field. Item specifics below. Invertek Drives has developed a reputation as one of the easiest drives to apply and use.

VEJMM3615T 5HP, 1750RPM, 3PH, 60HZ, 184JM, 3642M, TEFC, F1

VEJMM3554T 1.5HP, 1760RPM, 3PH, 60HZ, 145JM, 3526M, TEFC

VEM3557T 1.5HP, 1165RPM, 3PH, 60HZ, 145TC, 3632M, TEFC

VEM3663T 5HP, 3480RPM, 3PH, 60HZ, 184TC, 0628M, TEFC, F1

EJM3550 1.5HP, 3450RPM, 3PH, 60HZ, 56J, 3520M, TEFC, F1

We have for purchase a used DeWalt Radial Arm Table Saw with a 16" blade. The motor is a GE 5 horse power and rated for 3 amp 1 phase 230 volt. The table measures 37" high by 37" deep by 48" wide.

7.5 hp rotary phase converter panel ,use this panel with your 3 phase 240volt motor to create a 7.5 hp single to three phase rotary converter to run all sorts of three phase equipment.

you are bidding on a EATON cutler hammer MVX9000 frequency drive model #MVX005A0-4 input voltage 380-480VAC 50-60HZ 3PH 8.5A output voltage 0-480VAC 3PH 8.2Amp 5HP frequency range 0.1-400HZ output these units were pulled from some big airconditioners that were working at the time the building was being demolished. they are being sold untested since we dont know how to are dont have the power to test them.

Newman 600-24 planer single surfacer 8" thick capacity Weighs 3300 lbs estimated Serial number 8193 5hp motor (tag missing, but other websites say this is about what it has. May be 7.5hp) Presently set up for 230 volt 3 phase power 4 knife head Shown here, in operation, Jan 2014. Removed since, and I have the dust hood that is shown in pic that will go with it.

Concrete Polisher, Concrete Grinder, Floor Surface Prep 220V Machine TPS X1 5HP

Used Norton GC55 Early Entry Green Concrete Saw Presented is a used Early Entry Green saw from Norton Clipper Construction Products. With a compact, light-weight design backed by the reliable Honda 5HP gasoline engine, the GC55 early entry saw is intended for a variety of applications. From green, cured or decorative concrete cutting to expansion joints, the features of this small push saw are hard to beat in a single saw.