60 amp fuse holder for sale, brand-new and used.

This fuse holder has been removed due to new service upgrade. It is still in good condition and ready to operate as your replacement to a different panel. This used Fuse Holder has also been cleaned and inspected for continuity by a Master Electrician.

Used but in good condition and working order Murray Manufacturing Corp 60 amp Range 240v Fuse Panel Pullout Fuse Holder says "RANGE" on the front Has (2) 5/16" wide tabs that stick out on 1 side - they are 2 7/16" apart (center to center) Black plastic is 2 3/8" by 3 3/16" There are no raised humps on the front of the pullout - if yours has (2) raised humps that say "ON" this is not the correct pullout

Used but in good condition and working order Murray Manufacturing Corp 60 amp MAIN 240v Fuse Panel Pullout Fuse Holder says "MAIN" on the front Has (2) 5/16" wide tabs that stick out on 1 side - they are 2 3/8" apart (center to center) Black plastic is 2 3/8" by 3 3/16" There are 2 raised humps on the front of the pullout - if yours does not have the (2) raised humps that say "ON" this is not the correct pullout

MURRAY 60 AMPERE 240V FUSE HOLDER "RANGE" THESE UNITS ARE IN GREAT SHAPE, THANKS FOR LOOKING! The dimensions for the "MAIN" and "RANGE" pulls are 3-11/16" wide by 4-1/8" high and stand 1-5/16" tall when standing on all four spades. .Kindly reference the pictures and dimensions carefully so you get the correct pull the first time, I have the other styles/brands listed separately.

FA FRANK ADAMS ELECTRIC 60 AMPERE 250V FUSE HOLDER "MAIN" OR "LIGHTS ONLY" THE UNIT HAS PAT NO. RE 22266 STAMPED ON THE FACE THESE UNITS ARE IN GREAT SHAPE, THANKS FOR LOOKING! The dimensions for both the "MAIN" and "RANGE" pulls are 3" wide by 3-3/8" high and stand 2-1/4" tall when standing on all four spades.

MURRAY 60 AMPERE 240V FUSE HOLDER "MAIN/LIGHTING" FLAT FACE ROUND handle, FLAT FACE It has two alignment tabs on the side of the black face that stick out 3/32" and are 2-3/8" center to center. The dimensions are 2-3/8" wide, 3-3/16 tall and if you measure with the unit laying flat on the prongs it is 2-1/8" high. Murray made these in a number of styles with different shaped handles, rectangular and oval.

FA FRANK ADAMS ELECTRIC 60 AMPERE 250V FUSE HOLDER "RANGE" THE UNIT HAS PAT NO. RE 22266 STAMPED ON THE FACE THESE UNITS ARE IN GREAT SHAPE, THANKS FOR LOOKING! The dimensions for both the "MAIN" and "RANGE" pulls are 3" wide by 3-3/8" high and stand 2-1/4" tall when standing on all four spades.

MURRAY 60 AMPERE 240V FUSE HOLDER "MAIN/MAIN" FLAT FACE round handle, It has two alignment tabs on the side of the black face that stick out 3/32" and are 2" center to center. The dimensions are 2-3/8" wide, 3-3/16 tall and if you measure with the unit laying flat on the prongs it is 2-1/8" high. Murray made these in a number of styles with different shaped handles, rectangular and oval.

CUTLER HAMMER 60 AMPERE 240V FUSE HOLDER "LIGHT" THESE UNITS ARE IN GREAT SHAPE, THANKS FOR LOOKING! The dimensions for the "MAIN" and "RANGE" pulls are 2-3/4" wide by 3-1/4" high and stand 2-1/4" tall when standing on all four spades. .Kindly reference the pictures and dimensions carefully so you get the correct pull the first time, I have the other styles/brands listed separately.

A Federal Pacific 60 amp 240 volt RANGE fuse holder pullout. This item is used, it is clean, there is no damage and it is in working order. This fuse holder will take fuses from 35 amp to 60 amp rated at 240 volt.

Two (2) Federal - NO ARK - Pull Out Fuse Holder and Four (4) Fuses One is labeled Main and one is labeled Range. There are three fuses that are 60 amps included and one fuse that is 50 amp included.

An AMERICAN 60 amp 240 volt RANGE fuse holder pullout. This item is used, it is clean, there is no damage and it is in working order. This fuse holder will take fuses from 35 amp to 60 amp rated at 240 volt.

A Federal Pacific 60 amp 240 volt MAIN fuse holder pullout. This item is used, it is clean, there is no damage and it is in working order. This fuse holder will take fuses from 35 amp to 60 amp rated at 240 volt.

A Cutler Hammer 60 amp 240 volt RANGE fuse holder pullout. This item is used, it is clean, there is no damage and it is in working order. This fuse holder will take fuses from 35 amp to 60 amp rated at 240 volt.

A Cutler Hammer 60 amp 240 volt main fuse holder pullout. This item is used, it is clean, there is no damage and it is in working order. This fuse holder will take fuses from 35 amp to 60 amp rated at 240 volt.

A Murray 60 amp 240 volt lighting & appliance fuse holder pullout. This item is used, it is clean, there is no damage and it is in working order. This fuse holder will take 35 amp to 60 amp 240 volt fuses.

A Murray 60 amp 240 volt main fuse holder pullout. This item is used, it is clean, there is no damage and it is in working order. This fuse holder will take 35 amp to 60 amp 240 volt fuses.

Gently used Wadsworth 8056 main disconnect. No signs of abuse on the copper, comes with two 60 amp fuses and the wires coming off the load side.