60 hp electric motor for sale, brand-new and used.

This is a new motor in the original box. The box is not in real good shape. This motor has a mounting plate.

60 HP GENERAL ELECTRIC MOTOR 650/2000 RPM 240 VOLT ARM 120 VOLT FLDS DPFG-BV TYPE - CD409AT ARM AMPS 207 FLD AMPS 9.6/3.0 30 MIN DUTY STAB. SHUNT WOUND FLD OHMS 25C 8.9 POWER CODE - E MOD# 5CD204PA002A012 SER# MK-1-1337 MK DPFG-BV ENCL. USED REMOVED FROM SERVICE..

Hi I am selling this New WEG Electric Motor, because I purchased it and realize to operate my hammer mill machine I should probably go with the higher hp motor to Get the maximum productivity out of the machine. So your gain @ a great price Electric Motors : Explosion Proof : Three-Phase : Explosion Proof - NEMA Premium

Brand new Electric motor TECO-Westinghouse. HP: 1/2 Volts : 575 3 phases RPM: 3450 HZ: 60 Fr: 56 Cat no: ZA.501TE5 Type : AEFAZA Enclosure : TEFC This is a low weight motor, all in alluminium whit removal base. You can change the base position to put the conduit box on the right or the left side of the motor.

Brand new Electric motor TECO-Westinghouse. HP: 1/2 (0,37 KW) Volts : 575 RPM: 1715 HZ: 60 Fr: Metric 71 Cat no: 1/2185wa71 Type : AEFAZA Enclosure : TEFC This is a low weight motor, all in alluminium. You can see the B14 flange on the picture, but we also have it with B5 flange.

G.E. motor, 3/4hp, GE, .75 hp, 1140 rpm, 48Z frame, 230/460 volts, 200-230/460vac, 3.3-3.8/1.9 amps, 3 phase, 60 hz, ODP, catalog #5K39SN152S, 5K38SN152S, 5K39SN152S, 5K39SN152, 48Z frame, HVAC mounting, .75hp, 1140rpm, 1170 rpm, 1140, 1170, 1200 rpm, 6 pole, 1140rpm, 1170rpm, 48Z frame, G.E., General Electric, .75hp, 3/4 hp, 3 ph, 1140rpm, .50HP, G.E.

Used very little - was on a HDC band saw that went bad after only using a few times. Motor works fine to my knowledge. 5/8" diameter x 2" long shaft.

electric motor for water pump mark : Franklin electric , model: 1103007465V : 115 / 230HP: 1/2Hz : 60SF : 1,6rpm :3450FLA :8,2/4,1SFA :10 / 5,0Cat. 10402

up for bid is a older working motor 3/4 Hp,, rpm 3450,,4.6 amps ,,60 cycle 110/230 volts it is CC rotation looking at pulley 2 1/2 stone is 5 1/2 " motor run in both dirictions depending on how you jump start some surface rust run fine once started,, 5/8 shaft shipping based on 50lbs packed Thanks Good Luck

WarnerSales Warner See all my listings: WarnerSales

Doerr .25 HP 1725/1424 RPM 208-220/440V 3 Phase Electric Motor LR22132 NEW Surplus - Unit has been stored on a warehouse shelf for some time. Power: .25 HP 1725/1424 RPM 208-220 / 440V Cycle: 60/50 Hz 3 Phase Frame: D56Z Base: RIGID

Brand new Electric motor TECO-Westinghouse. HP: 1 Volts : 575 RPM: 1715 HZ: 60 Fr: Metric 80 Cat no: 1185wa80 Type : AEFAZA Enclosure : TEFC This is a low weight motor, all in alluminium. You can see the B14 flange on the picture, but we also have it with B5 flange.

NEW BALDOR 5 HP, 1 PHASE, 230 V0LTS, 23 AMPS, 1725 RPM, ODP, 184T FRAME, 1 1/8" SHAFT, 84 LBS, OEM CAT# 04041960, OEM MOTOR HAS THE SAME SPECS AS THE L1410T. note: if this motor is unavailable will use an L1410T FULL BALDOR WARRANTY Specifications: SPEC. NUMBER: 36M925W849G2 CATALOG NUMBER: 04041960

For sale is a brand new grower select motor It has reversible rotation Hp 1 Rpm 1725 Hertz 60 volts 115/208-230 Frame 56 Shaft diameter 5/8" Shaft length 1 7/8" Shaft shape keyed Motor diameter 6.5" Motor length w/o shart 12" Motor weight 29.7 lbs