+ Post new Ad
60" x 26" DOALL "ZEPHYR" VERTICAL BAND SAW - #25561, US $19,500.00 – Picture 0
60" x 26" DOALL "ZEPHYR" VERTICAL BAND SAW - #25561, US $19,500.00 – Picture 0

60" X 26" Doall "zephyr" Vertical Band Saw - #25561

US $19,500.00

  • Cincinnati, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
This saw requires a floor space of 4'6" x 9'5" and weighs approximately 5650 pounds. In very good condition and taken from service, this saw can be yours for $19,500.00 F.O.B. our warehouse. Don't hesitate - this machine is subject to prior sell! Are you in the market for a high-quality vertical band saw? Look no further than the 60" x 26" DOALL "ZEPHYR" VERTICAL BAND SAW, with a serial number of 6006251 and model ZV60-26. This saw is part of the "ZEPHYR" series and comes equipped with a traveling tilting table, auxiliary table #DBW-5, and a DoAll Blade Welder & Grinder for maximum efficiency. The DOALL "ZEPHYR" VERTICAL BAND SAW has impressive catalogue specifications, with a work capacity of 60" x 26" and a maximum work height capacity of 26". It also boasts a throat depth of 60" and a main motor with 7.5 horsepower. You can adjust the table tilt to the left or right, with angles of 10 and 45 degrees, respectively. This saw has blade speeds you can infinitely vary from 2000 to 10000 FPM, making it suitable for a range of cutting tasks.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Model ZV60-26
Brand DOALL

Directions

Similar products from Professional Sawing Equipment

Heavy Duty Carbon Steel 93" x 1/2" Replacement Wood Cutting Bandsaw Blade

Heavy Duty Carbon Steel 93" x 1/2" Replacement Wood Cutting Bandsaw Blade

  • Columbia, Maryland, United States
  • Jan 30th
DELTA MODEL 20 20" VERTICAL BANDSAW BLADE GUIDE HEX HEXAGONAL BAR

DELTA MODEL 20 20" VERTICAL BANDSAW BLADE GUIDE HEX HEXAGONAL BAR

  • Clermont, Georgia, United States
  • Jan 30th
DELTA MODEL 20 20" VERTICAL BANDSAW MOTOR PULLEY 41-709

DELTA MODEL 20 20" VERTICAL BANDSAW MOTOR PULLEY 41-709

  • Clermont, Georgia, United States
  • Jan 30th
DELTA MODEL 20 20" VERTICAL BANDSAW SLIDE PLATE 426040725007

DELTA MODEL 20 20" VERTICAL BANDSAW SLIDE PLATE 426040725007

  • Clermont, Georgia, United States
  • Jan 30th
DELTA MODEL 20 20" VERTICAL BANDSAW BLADE GUIDE MAIN CASTING 426040145011

DELTA MODEL 20 20" VERTICAL BANDSAW BLADE GUIDE MAIN CASTING 426040145011

  • Clermont, Georgia, United States
  • Jan 30th
TRISTATE POP UP CUTOFF CROSSCUT SAW = PISTORIUS OLIVER

TRISTATE POP UP CUTOFF CROSSCUT SAW = PISTORIUS OLIVER

  • Clermont, Georgia, United States
  • Jan 30th
9.4" x 9.4" TUBEMART "BE310DSA" SEMI-AUTO HYDRAULIC HORIZONTAL BAND SAW - #26163

9.4" x 9.4" TUBEMART "BE310DSA" SEMI-AUTO HYDRAULIC HORIZONTAL BAND SAW - #26163

  • Cincinnati, Ohio, United States
  • Jan 30th
12.5" X 19.6" KASTO-KALTENBACH AUTOMATIC HORIZONTAL BAND SAW - #24604

12.5" X 19.6" KASTO-KALTENBACH AUTOMATIC HORIZONTAL BAND SAW - #24604

  • Cincinnati, Ohio, United States
  • Jan 30th
16" x 20" MARVEL AUTOMATIC HORIZONTAL BAND SAW - #24582

16" x 20" MARVEL AUTOMATIC HORIZONTAL BAND SAW - #24582

  • Cincinnati, Ohio, United States
  • Jan 30th
18" x 20" PEERLESS "VB1820XL" TILTING-HEAD VERTICAL BAND SAW - #23571

18" x 20" PEERLESS "VB1820XL" TILTING-HEAD VERTICAL BAND SAW - #23571

  • Cincinnati, Ohio, United States
  • Jan 30th
KCS1000 KURAKI AUTOMATIC CIRCULAR COLD SAW - #25758

KCS1000 KURAKI AUTOMATIC CIRCULAR COLD SAW - #25758

  • Cincinnati, Ohio, United States
  • Jan 30th
DG102 ELU TILTING-HEAD DOOR SAW - #26062

DG102 ELU TILTING-HEAD DOOR SAW - #26062

  • Cincinnati, Ohio, United States
  • Jan 30th
PO31PK-PD TUBEMART PNEUMATIC CLAMP MITERING CUT-OFF SAW - #26181

PO31PK-PD TUBEMART PNEUMATIC CLAMP MITERING CUT-OFF SAW - #26181

  • Cincinnati, Ohio, United States
  • Jan 30th
Powermatic 20" Vertical Band Saw: (Inv.14811)

Powermatic 20" Vertical Band Saw: (Inv.14811)

  • Portland, Connecticut, United States
  • Jan 30th
BARCO SAWYER LUMBER ENCLOSURE CAB

BARCO SAWYER LUMBER ENCLOSURE CAB

  • Chestertown, Maryland, United States
  • Jan 30th
Tornado marathon 800 carpet cleaner

Tornado marathon 800 carpet cleaner

  • Chambersburg, Pennsylvania, United States
  • Jan 30th
Table saw blades

Table saw blades

  • Thaxton, Virginia, United States
  • Jan 30th
Delta Rockwell Model 33-310

Delta Rockwell Model 33-310

  • North Hills, California, United States
  • Jan 30th
1940 Oliver 270 Table Saw

1940 Oliver 270 Table Saw

  • Columbus, Ohio, United States
  • Jan 30th
GRIZZLY ULTIMATE 14" BANDSAW MODEL G0555

GRIZZLY ULTIMATE 14" BANDSAW MODEL G0555

  • Spring Valley, New York, United States
  • Jan 30th

People who viewed this item also vieved

Dynabrade 48500 Diameter Right Angle Disc Sander, 2-Inch

Dynabrade 48500 Diameter Right Angle Disc Sander, 2-Inch

  • Tulsa, Oklahoma, United States
  • Jun 8th
Dynabrade 52666 1 hp Straight-Line Die Grinder

Dynabrade 52666 1 hp Straight-Line Die Grinder

  • Sanford, North Carolina, United States
  • Jun 8th
Jet / Performax / Ryobi 16-32 drum sander conveyor motor

Jet / Performax / Ryobi 16-32 drum sander conveyor motor

  • Lancaster, Minnesota, United States
  • Jun 9th
3d stl model for CNC Router mill - VECTRIC RLF ARTCAM woman on the hood of car

3d stl model for CNC Router mill - VECTRIC RLF ARTCAM woman on the hood of car

  • Vilikiy Novgorod, Novgorodskaya, Russian Federation
  • May 24th
3d stl model for CNC Router mill - baget 1

3d stl model for CNC Router mill - baget 1

  • Vilikiy Novgorod, Novgorodskaya, Russian Federation
  • May 24th
3d stl model for CNC Router mill -VECTRIC RLF panel rose

3d stl model for CNC Router mill -VECTRIC RLF panel rose

  • Vilikiy Novgorod, Novgorodskaya, Russian Federation
  • May 24th
Vintage DELTA Drill Press Spindle No. 974 w/ Original Box - Old USA Tools - VGC

Vintage DELTA Drill Press Spindle No. 974 w/ Original Box - Old USA Tools - VGC

  • Malden, Massachusetts, United States
  • May 24th
Buffalo Forge 15" Drill Press Quill Handle

Buffalo Forge 15" Drill Press Quill Handle

  • Long Beach, California, United States
  • May 24th
Rockwell bench top drill REDUCED

Rockwell bench top drill REDUCED

  • Winsted, Connecticut, United States
  • May 24th
APEX 16” Disc Sander 10” x 23” Table Model 16-D

APEX 16” Disc Sander 10” x 23” Table Model 16-D

  • Euclid, Ohio, United States
  • May 30th
MOBIL 3000 Edgebanding Press BY HESS PRESS

MOBIL 3000 Edgebanding Press BY HESS PRESS

  • Ridgewood, New York, United States
  • May 30th
Hold Down Bench Dog Clamp Blacksmithing Handmade

Hold Down Bench Dog Clamp Blacksmithing Handmade

  • Berthoud, Colorado, United States
  • May 30th
Newest Mini Lathe Beads Machine Polisher Table Saw Mini DIY Wood Lathe 80W 24V

Newest Mini Lathe Beads Machine Polisher Table Saw Mini DIY Wood Lathe 80W 24V

  • Shenzhen Guangdong, China
  • May 31st
10" Romi CNC Turning Center. 1999 Lathe w/ 22" x 40" cap, Fanuc 21i-T & 2.5" Bar

10" Romi CNC Turning Center. 1999 Lathe w/ 22" x 40" cap, Fanuc 21i-T & 2.5" Bar

  • Rockford, Illinois, United States
  • Jun 1st
VINTAGE DELTA ROCKWELL 12" WOOD LATHE TOOL REST BASE for 1 1/2" gap Lathes

VINTAGE DELTA ROCKWELL 12" WOOD LATHE TOOL REST BASE for 1 1/2" gap Lathes

  • Mahwah, New Jersey, United States
  • Jun 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies