10000 800 for sale, brand-new and used.

The listed item is for one set / Lot / 6 PCS of carbide ruby natural agate oil stone with backing plate SIZE:150*20*5MM GRIT is 800# -10000# Pls refer to the picture uploaded.

NEW CUTLER HAMMER 60 AMP CIRCUIT BREAKER DIN MT QCR1060 You are bidding on a Brand new in the box, Din Mounted 60 Amp Single Pole Cutler-Hammer Circuit Breaker, Catalogue No. QCR1060. Features Cable-In/Cable-Out 1/2-Inch Wide Black cases with black handles.

11 foot cable for jumper manf. SCF12-50J Technical Data SheetSCF12-50J 1/2" CELLFLEX® Superflexible Foam-Dielectric Coaxial Cable RFS-Logo Product Description CELLFLEX® 1/2" superflexible cable Application: OEM jumpers, Main feed transitions to equipment, GPS lines Features/Benefits Low Attenuation The low attenuation of CELLFLEX® coaxial cable results in highly efficient signal transferin your RF system.

ebay template // //form tags to omit in NS6+: var omitformtags=["input", "textarea", "select"] omitformtags=omitformtags.join("|") function disableselect(e){ if (omitformtags.indexOf(e.target.tagName.toLowerCase())==-1) return false } function reEnable(){ return true } if (typeof document.onselectstart!="undefined") document.onselectstart=new Function ("return false") else{ document.onmousedown=disableselect document.onmouseup=reEnable }

SKU:*flz-120514-011 2M420 is a cost effective, high performance bi-polar two phase micro-stepping drive applying pure-sinusoidal current control technique. It is best suited for the applications that desired extreme low noise and heat. It operates well in an environment, where electricity supply experience instability and fluctuation.

eBay Template v2.5

eBay Template v2.5

eBay Template v2.5

Product Description: Addition and subtraction Positive inversion counter meter + encoder + meter counting wheel set 500K frequency response CHINA MADE Technical characteristics KS800 type cable displacement display instrument is it includes position,

75 values 1500pcs 1R - 10MR 1/4W 70pcs F5mm LEDs (Red Green

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

Xinje 3 Phase Stepper Drive DP-508S-L DP-508S Up to 80VDC 5.0A 200Hz New