600 watts for sale, brand-new and used.

Lot of 6 Used Richmag Open-frame Solinold P/N RG-O-0520L Additional Pictures: Click on picture to view larger image.

VICTOREEN RESISTOR 600 K 1% 75 WATT MODEL MOX-J a.imagelink {color:#C9C9C9;} a:hover.imagelink {color:#C9C9C9;} a:visited.imagelink {color:#636363;} a.imagelink img.auctionimage { border: 2px solid #C9C9C9; } a:visited.imagelink

DATEL ADS-CCD1202MC DDIP-24 Sampling A/D Includes a two piece heat sink Carefully removed from a proprietary PCB Unipolar input range (0 to +10V) 2MHz sampling rate 4096-to-1 dynamic range (72.2dB) Low noise, 600?Vrms (1/4 of an LSB)

Edwards Signaling 8" Speaker Baffle Assembly 600-8S- 25/70 Product Description...... Edwards 6000 Series Baffled speakers are high Quality unit that feature a tastefully constructed steel baffle that blends well with modern interiors.. The speaker assembly includes a dual voltage 70 and 25- Volt matching transformer....

MJE 13006 NPN power transistor, Motorola, 80 watts, 8 amps 300 volts.

TRIPP LITE

This solar charge controller has been mounted in a display but never electrically connected. The unit has been tested by the manufacture and works perfectly. Doesn't come with the user manual, the user manual can be found here - zampsolar.

Dwyer SCR Power Controller 3 Volts to switch On 115 or 240 VAC 1, 5, 10. 20, 40 Amps to run up to 10 Horse Power Motor 120 or 240 Volts AC 5, 10, 20, up to 40 Amps 1 Phase Light Dimmer; trigger at 60Hz, Heaters, Heater Bands, Tank Heaters, Furnaces, Ovens, This has the heat sink to handle ON or Off switching up to 40 Amps 240 Volts or 9,600 Watts.Turn ON with 20 milliamps (an LED in series) Signal from 3 or 5 Volt DC or AC wall switch. use with a Temperature Switch (see other items for sale)

Dwyer 3020-48-40-4 SCR Power Controller 115/480 VAC 40 Amp 3Ph Switch On/Off Oven, Motor.115VAC 20A 1Phase or 240V 40Amp or 3 Phase 480 VAC 9,600 Watts Heaters Motors up to 12 HPComes as two modules, as pictured. for Flood Light Dimmer- trigger at 60Hz; example in series with a LED from switch or PLC.

The G0704/WMD20 style machines have well known problems with their power-trains. Gears stripping, motors burning out, drive boards blowing - all create a very unreliable machine. If you plan on CNCing your machine, or just want to do a lot of work, a replacement motor is a must!

You are bidding for a new Stock Drive D33S38M5560033 gear motor 33:1 60oz-in 24V DC 103RPM 6mm shaft. Guaranteed fully functional. Part Number: D33S38M5560033D.C.

WattNode Plus for LonWorks The WattNode Plus is a kilowatt-hour (kWh) energy and power meter that communicates on a LonWorks network and measures 1, 2, or 3 phases with voltages from 120 to 600 Vac and currents from 5 to 6,000 amps in delta (line-to-line) and wye (line-to-neutral) configurations.

var itemNumber = window.ebayItemID ?

6-Digit Impulse Counter 12Vdc Non-resettable, 6-digit, 12Vdc electro-mechanical counter counts each rise and fall as one pulse thus one count. Each counter is new old stock and tested for proper operation. Note: Shelf-worn with light blemishes that do not affect operation.

var itemNumber = window.ebayItemID ?

This switch is new and has never been installed, but it comes with no original box or paperwork. Wallplate is included.

CASEY ELECTRIC SUPPLY FASTHEAT Cartridge Heater

NEW PERMANENT MAGNET DC MOTOR/GENERATOR EXCELLENT LOW WIND CAPABILITIES

Tested works as it should The Hp Model 350D is an accurate, wide frequency range attenuator which provides attenuation from 0 db to a maximum of 110 dB.The Model 350D will dissipate a maximum of 5 watts in continuous use with good accuracy from DC to 1 MHz.This model consists of two additive sections: 100dB adjustable in 10 dB steps and 10 dB adjustable in 1 dB steps.Input and output impedance 600 Ohm.