yes MT1 aka Morse Taper One BIN 6/22 F is all USA Nice MT1 drills as used on Atlas 6 and Myford Lathes @@gen U wine USA !!!@@ --all 100% checked (little or no use) so LOOK ---BUY--COMBINE ~~~~~~~~~~~~~~~~~~~~~~~~~~
#1 Morse Taper drill Bits6- Each23/64" Union Twist Company7/16" Cle-Forge25/64" Cle-Forge3/8" Union Twist Company27/64" Union Twist Company33/64" C.T.D Company USA
Taper Shank Twist Drill - High Speed – Made in USA – Chicago Latrobe: 27/64 Used but very clean and sharp. Length overall is 7.25 inches, shank is 2.5 inches.
Ten Morse #1 shank drill bits. Sizes are P, 9/32",23/64",G,15/32",5/16",29/64",.450",27/64",3/8".Decent condition, one has been ground for flat-bottom. Various U.S.
Taper shank twist bits right turn. All bits have been professionally sharpened. Material is HSS,all shanks are #1mt sizes are(27/64 oal 7 3/8, flute length 4 7/16).
National High Speed Drills (1) 27/32 Diameter X approximately 10" long Straight Shank Taper Length Regular Helix Polished Flutes Condition: Used (2) 33/64 Diameter X approximately 8" long Straight Shank Taper Length Regular Helix Super Tem. Condition: Used See all pictures for the details that I described. Please email me with any questions, and thank you for viewing.
This is a Fixed Auction for up to 14 Brand New Morse Cutting Tools, 27/64" (.4218") diameter High Speed Taper Shank Drill, No. 1302. PLEASE NOTE: Each bid is for One Drill.
These are 5 HSS Drills w/ 1MT Shanks. SPECIFICATIONS: Cutting Diameters: 3/8", 13/32", 27/64", 7/16", 29/64" Length of Cut Range: 1-1/2"" to 3-5/8" Shanks: 1MT Overall Length Range: 5-1/2" to 7-5/8'' Comes exactly as shown in pictures.
These are 6 HSS Drills w/ 1MT Shanks. SPECIFICATIONS: Cutting Diameters: 10.2MM, 7/16", 27/64", (2) 12MM, 12.2MM Length of Cut Range: 3" to 3-1/2" Shanks: 1MT Overall Length Range: 7-1/8" to 7-3/8'' Comes exactly as shown in pictures.
THIS IS A LOT OF FIVE DRILL BITS,TWO ARE 59/64,ONE EACH OF 15/16,55/64 & 27/32 TAPER SHANK DRILL, 11" OAL, HS, MORSE #3, Size: 27/32",55/64/15/16 & 2 OF 59/64" Overall Length: AROUND 11" Flute Length: 7" Shank Length: 4" Shank Top Diameter: .09380" Shank Bottom Diameter: .7780" Appears to be Morse Shank #3 2 Flutes High Speed *ALL MEASUREMENTS ARE APPROXIMATE*
Solid Micro Grain Carbide Endmill. This tool has a 27/64" (.421") cutting diameter on a 7/16" shank with a 7/8" length of cut and is 2-1/2" overall length. These are unused "old" inventory manufactured in Michigan.
13/32" Dia Counterbore 4 Flute w/ 1/8" Dia pilot the numbers 424 & 27/64 are ground into the shaft, but the counter bore actually checks .406 or 13/32" dia with .125 or 1/8" Dia pilot Pilot can be removed.
This set includes 27 pieces, These come with some oil on them to prevent rust. They are brand new and never used. These stamps are made out of hardened Steel.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.