Aluminum Angle 5/8” x 5/8” x 48 in, 1/16 in thick, 5/8 IN x 5/8 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Offset Angle 1” x 2” x 48 in, 1/16 in thick, 1 IN x 2 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 2” x 2” x 48 in, 1/16 in thick, 2 x 2 in, NEW!, Angles Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick. They measure 2 x 2 x 48 inch.
For pricing or shipping discounts, combination orders, volume discounts, purchasing over the phone, or general information please call me on my cell at: (six, seven, eight,)-(two, zero, zero)-(zero, eight, six, two). Aluminum Angle 1/2 ” x 1/2 ” x 48 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – When
Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in Description – This is a special type of angle that was developed out of my solar panel business for the building of solar panels and eventually I realized other people had lots of other uses for them. How it works is that there are two 3/4 in channels riveted together. You can use the channel as is or, because it has layers, you can cut through one or both layers to create tabs that c
Autoclave Engineers 30VM9071-WO, High Pressure Valve, 30,000 PSI...9/16". Used, in good condition, has some scuff marks from storage (as seen in pictures). High Pressure Valve Features: Rising stem/barstock body design.
Continuous knurled tubing x 24 inches long. Made from 1 1/8 inch diameter weldable carbon steel tubing with a 7/8 inside diameter Knurled with a 20TPI pattern diamond. Need more than one I will set up auction for multiple parts with volume discount.
Aluminum Round Tubing - 1" OD x 1/16” x 48" Long NEW, .062, .75 IN Description –They measure 1" OD x 1/16” x 48 inch. They are a 6063 T5 type aluminum, strong and light. They have no finish and may come with rub marks, scratches, and scuffs but will be straight with no dents.
FOR SALE Aluminum Part Shown in Pictures. Left over from an ultralight aircraft repair, this part has been stored under the shop bench for over 30 years.
Aluminum Flat Diamond Plate Sheet Stock 1 in x 48 in, 1/16 thick, 1in, 1 in, 1”, New Description –They measure 1 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Diamond Plate Sheet Stock 6 in x 48 in, 1/16 thick, 6in, 6 in, 6”, New Description –They measure 6 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
Aluminum Flat Diamond Plate Sheet Stock 12 in x 48 in, 1/16 thick, 12in, 12 in, 12”, New Description –They measure 12 x 48 inch. This also goes by the names of Tread Brite and Has Plate. They are easy to work with and are a 3003 type aluminum.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
