Gatemotors would like to thank you for taking the time to visit our eBay auction. We are a U.S. Based international wholesaler of security equipment specializing in Gate Operators, Access Control Equipment, Parking Systems, Surveillance / CCTV Equipment, Magnetic Locks and Electric Strikes.
This is a listing for an Masterflex I/P 7592-82 Digital Modular Drive, 20-650 rpm, W 7592-40 Motor, 77600-62 Head What you will get: 1 Masterflex I/P 7592-82 Digital Modular Drive, 20-650 RPM 1 Cole Parmer Masterflex I/P Pump Drive Model 7592-40, 0.2 HP, 20-650 RPM 1 Masterflex 77600-62 I/P High-Performance Pump Head, Polyester/SS Housing with SS Rotor
Titan PowrTwin™ 12000 Plus For large scale industrial and commercial projects – where maximum GPM output is the difference between profit and loss – serious professionals turn to the PowrTwin™ 12000 Plus, a super workhorse that can feed any architectural primer or paint coating to as many as SIX guns.
I'm selling a LS ExtraDuty Leroy-Somer 3 phase 7.5 HP motor with 3 phase starter relay box. Runs off 200/230/460, Continuous duty, 1740 RPM, 213T frame. Comes with 2000psi hydraulic pump and a base with shaft guard.
SAMUSCO ECS225P START RELAY FOR USE ON .50 TO 6 HP 1 PHASE 230 VOLTS CAPACITOR START-CAPACITOR RUN ELECTRIC MOTORS/PUMPS. THIS RELAY CAN BE USED ON 7.5 HP ELECTRIC MOTORS AND PUMPS IF THE AMPS DO NOT EXCEED 25. NOTE: THIS RELAY IS GREAT TO USE IN SIMPLEX AND DUPLEX GRINDER PUMP STATIONS 1PH 208 OR 230 VOLT OPERATION.
Used Sullair Air compressor well maintained , good running condition when taken out of service. Below was copied off the web: ES-6 S-energy® Encapsulated Rotary Screw Air Compressor ES-6 compressors offer Sullair reliability in the most compact, most robust, most maintenance-friendly and quietest compressor package available on the market.
Re listing this good Baldor motor with fresh paint, at no reserve, Capacitor start, 56 Frame, 1/2 HP, 3450 RPM, 115/230 Volt, single phase, 1.25 Service Factor.Reversible rotation, 7.8/3.9 Full load amps, 5/8" OD Shaft with key-way.
You are purchasing a 110 volt 2850 rpm quality Haskins strand 1/4 hp electric motor with a 1 inch shaft which is tapered as shown in pics. This motor has a bracket for mounting with a two way toggle switch. This motor draws 4 amps at 2850 rpm.
3 phase 1 horsepower motor with slow start control box and switch. This setup is stock from Rockwell and came off an older Delta industrial lathe. Used but well cared for, tested and working great.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
