700/13 for sale, brand-new and used.

Unitron Unimet 7886 Metallurgical Microscope w/ Sony Camera System Recent Calibration From M&R Optical: 11-14-12 - 11-14-13 Optics: Binocular View: Unitron Bi17-1572 Eye Pieces Unitron NWF10x Lens MPL5x Plan M10x Plan M20x

Please visit our About page for more information about us and our products!

Classic Archives Listing Please visit our About

For use in Numertap 700 Attachments. Coolant or Coolant Groove Adapters must be used when coolant is fed through Numertap Attachments. Numertap torque controlled adapters require no adjustment.

THIS AUCTION IS FOR A LARGE LOT OF 20 USED BRIDGEPORT/ERICKSON BTC-1 TOOLHOLDERS, COLLET'S AND CHANGING BLOCK. BTC-35 TOOLHOLDERS THESE CAME OUT OF A VOCATIONAL SCHOOL LOOKS LIKE THEY HAVEN'T BEEN USED MUCH AT ALL!! HOLDERS: (10) 75HTG C141192 (1 MISSING NUT) (3) C143105 DA COLLET HOLDER (1 MISSING NUT) (2) C142857 D08 TAPPING HOLDERS (1) C142858 F08 TAPPING HOLDER (1) C143096

Used - Good Condition - 13/16" Hand Tap Adapter To Fit Numertap 700 Holder - I have multiple pieces. The one in the photo may not be the one you get. They are all in the same condition.

ROYAL Versa-Turn Live Center - Overall Length : 9-13/16" Taper: 5 MT 5MT 3.38" VERSA-TURN LIVE CENTER - ROYAL For General Shop Use On Manual Engine Lathes

FOR SALE SET OF SIX MADE IN USA DE STA CO CLAMPS MODEL 602 AND 604

Double-Acting push/pull hydraulic Threaded-Body Cylinder with plunger head Bolt Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the work piece surface irregularities,also deflection and vibration under machining loads.&nb

CLAMP MFG KANT-TWIST 407 2" CLAMP

Highly innovative yet enticingly simple, patented low profile K9-Side Clamps are able to produce anywhere from 15,700-35,000 lbs of clamping force at a fraction of the cost of any competitors, complete with a durable cadmium coated base. The unique tip design allows for strong, reliable, clamping of even the most exotic alloys with no need for smooth or perfectly perpendicular edges.

Office: 830-775-2580 Our Asset #:RK5 / 008 Qty available:1 Crimping Press quick release tool holder or Die Holder w adjustable top Gallery Photo

Office: 830-775-2580 Our Asset #:RK5 / 006 Qty available:1 Crimping Press double quick release tool holder or Die Holder Gallery Photo

Office: 830-775-2580 Our Asset #:RK5 / 003 Qty available:1 Crimping Press quick release tool holder or Die Holder base Gallery Photo

Office: 830-775-2580 Our Asset #:RK5 / 010 Qty available:1 Crimping Press quick release tool holder or Die Holder Gallery Photo

Description – Bunch or random Flat and Angles mixed in. Nothing is wider than 1.5in. Don't ask us all the sizes because we won't know.

Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.

Aluminum Angle 1-1/2” x 1-1/2” x 21.5 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – These are left over from a project. The length varies from 21.5 to 22in long.