A 7" LCD display with a resistive touch screen component, compatible with Olimex A10, A13, A10s, A20 Allwinner development boards with either 0.1" or 0.05" LCD connector. Suitable for Linux and Android video output.
LD12C Series - Constant Current LED Driver Board with PWM Control is a highly effective continuous step - down converter optimized for managing one or High Power LED string from a source with a higher voltage than the sum of the voltages of all LED strings attached . Control algorithm allows highly efficient and accurate control of power LEDs . The device operates from an input voltage between 8V and 32V and provides an externally adjustable output current of up to 1A .
Comair Rotron 120 mm High CFM Cooling Fan - 8.4 Watt - 48 V DC - 100 CFM - 3 Wire Brand new fan made by Comair Rotron Product line: Muffin DC Model No: MC48B7X Dimensions: 120 mm x 120 mm x 32 mm Nominal voltage: 48 V DC Fan starts to rotate at approximate 18 V DC Recommended operating voltage: 24 to 56 V DC Current: 180 mA Power: 8.4 Watts Speed: 3,700 RPM Airflow
Aluminum Heat Sink for Electronics Computer Electric equipment 3.95''*1.57''*0.79" Click here - add $3 for registered airmail Description: 100% Brand New Materials : Alumi
28x28x5.8mm Aluminum Heatsink Heat Sink w adhesive Router Computer Cooling new Description: 100% Brand New Materials : Aluminum Size : 28x28x5.8 (L*W*H) Weight : 8g / 1pcs Used for : Electronic, Computer, North and South Bridge, Chips, Router, Video Card ,Raspberry Pi Bo
5pcs 3W high power LED Aluminum Heatsink Round D50H10MM New Hot Note :Here are two types,surface with hole and without hole ,Sent at random Description: Good quality with c
10pcs 3 Watt LED Aluminum Heatsink Round Sun flower radiator OD32ID20H26 New Hot Description: Good quality with competitive prices LED street lamp heat sink Good thermal performance LED street heat sink Much easier installation and assembling LED light heat s
Aluminum Heat Sink For Computer Electronic DIY 0.87"x0.87"x0.39" Description: 100% Brand New Materials : Aluminum Size : 22mm(0.87'')x22mm(0.87'')x10mm(0.39'') Number of the tooth : 6pcs Thickness of the baseplate : 2mm Thickness of the tooth : 1.2mm
DHT11 Temperature and Humidity Sensor use with arduino or Raspberry PI lab calibrated, accurate and stable the signal output is digital Pin out Diagram included with each DHT11 The DHT11 is lab calibrated, accurate, stable and its signal output is digital. It is inexpensive for the given performance. The DHT11 is a robust one-wire device that can measure both temperature and humidity.
2x DHT11 Temperature and Humidity Sensors use with arduino or Raspberry PI lab calibrated, accurate and stable the signal output is digital The DHT11 is lab calibrated, accurate, stable and its signal output is digital. It is inexpensive for the given performance. The DHT11 is a robust one-wire device that can measure both temperature and humidity.
5Pcs Mini 2.4G NRF24L01+ 24L01 -M wireless transceiver module 1.9 - 3.6 V Product Description Name: mini 2.4 G wireless module Type: 24L01 -M The power supply voltage: 1.9 to 3.6 V Receiving sensitivity: 2Mbps - -83dB; 1Mbps - -87dB; 250kbps - -96dB Receiving current: 2Mbps - 15mA; 1Mbps - 14.5mA; 250kbps - 14mA Standby current: 15 uA Off the electric current: 700 nA Working temperature: - 20 °C ~~+ 55 °C Storage temperature: to 40 °C ~~+ 125 °C
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
