Below is a list of Discontinued / Obsolete Wiremold series 2000 / 3000 / 5507 / 2400 series raceway fittings. If you are interested in this bulk buy please contact me. We have raceway too but I did not add this to the list because of the bulk of the shipment will be pretty pricey wherever it will go throughout the states.
Basically a brand new Rotomaster Phase converter that we installed and only used one time because our service was too small to handle the load in our backwoods location. We did not have enough service. This unit will power up 10 to 15+ hp to my knowledge.
Basically a brand new Rotomaster Phase converter that we installed and only used one time because our service was too small to handle the load in our backwoods location. We did not have enough service. This unit will power up 10 to 15+ hp to my knowledge.
Office: 830-775-2580 Our Asset #:KSC501 / 18 Qty available:1 EXIDE 5 KVA UNINTERRUPTIBLE POWER SYSTEM RL-82710-02 120V AC 105-140 DC 120V out Gallery Photo
A 7" LCD display with a resistive touch screen component, compatible with Olimex A10, A13, A10s, A20 Allwinner development boards with either 0.1" or 0.05" LCD connector. Suitable for Linux and Android video output.
LD12C Series - Constant Current LED Driver Board with PWM Control is a highly effective continuous step - down converter optimized for managing one or High Power LED string from a source with a higher voltage than the sum of the voltages of all LED strings attached . Control algorithm allows highly efficient and accurate control of power LEDs . The device operates from an input voltage between 8V and 32V and provides an externally adjustable output current of up to 1A .
Comair Rotron 120 mm High CFM Cooling Fan - 8.4 Watt - 48 V DC - 100 CFM - 3 Wire Brand new fan made by Comair Rotron Product line: Muffin DC Model No: MC48B7X Dimensions: 120 mm x 120 mm x 32 mm Nominal voltage: 48 V DC Fan starts to rotate at approximate 18 V DC Recommended operating voltage: 24 to 56 V DC Current: 180 mA Power: 8.4 Watts Speed: 3,700 RPM Airflow
DHT11 Temperature and Humidity Sensor use with arduino or Raspberry PI lab calibrated, accurate and stable the signal output is digital Pin out Diagram included with each DHT11 The DHT11 is lab calibrated, accurate, stable and its signal output is digital. It is inexpensive for the given performance. The DHT11 is a robust one-wire device that can measure both temperature and humidity.
2x DHT11 Temperature and Humidity Sensors use with arduino or Raspberry PI lab calibrated, accurate and stable the signal output is digital The DHT11 is lab calibrated, accurate, stable and its signal output is digital. It is inexpensive for the given performance. The DHT11 is a robust one-wire device that can measure both temperature and humidity.
5Pcs Mini 2.4G NRF24L01+ 24L01 -M wireless transceiver module 1.9 - 3.6 V Product Description Name: mini 2.4 G wireless module Type: 24L01 -M The power supply voltage: 1.9 to 3.6 V Receiving sensitivity: 2Mbps - -83dB; 1Mbps - -87dB; 250kbps - -96dB Receiving current: 2Mbps - 15mA; 1Mbps - 14.5mA; 250kbps - 14mA Standby current: 15 uA Off the electric current: 700 nA Working temperature: - 20 °C ~~+ 55 °C Storage temperature: to 40 °C ~~+ 125 °C
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
