75 ton for sale, brand-new and used.

GREENERD HYDRAULIC PRESSES 2-75 TON CATALOG NO. 56. 10 PGS.

Selling a Coffing hoist trolley. I am not for sure but almost 100% sure that this is for a 4 ton hoist. The trolley is fully functional.

Specifications: Engel "Two-Shot" Injection Molding Machine '98 Mdl: ES 600/200/300 Ton Capacity: 300Shot Size: 8.2 Oz. + 2.2 Oz.Platen Size: 35.67" x 35.67"

Sold As: Dimple Die Set Includes: 0.50 - 0.75 And 1.00 8620 Bearing Steel. Rockwell Hardness 80. Will Do Up To 3/16 Plate Using A 20 Ton Press Please view the Video below for Instructions on how to use Dimple Dies- (Skip to 5:50)

ENERPAC SCH603H Pump/Hollow Cylinder Set, 60 Ton Cap ENERPAC Item Specifics ItemPump and Cylinder Set TypeHollow Cylinder C

335 Ton HPM Injection Molding Machine, Model Universal 2, 22 Oz, 2000 Vintage Used 335 Ton HPM Injection Molding Machine, Model Universal 2, 22 Oz, 2000 Vintage Clamp Force.....................335

For Sale....25 Ton Schwabe Hydraulic Clicker Press, model D. **working video available upon request** Works great. Still using weekly to cut plastic parts.

Cincinnati Milacron Powerline NT750-70MM/80, 750 ton, 2002, ZAG#5699 70mm screw controller Extreme ST voltage 230-3-60 80 oz./150.3 cu in injection capacity max daylight 78.74 in max/min mold height 39.37/15.75 in max mold weight 26,700 max clamp stroke 39.37 in platen size 57.1 x 60 in tie bar spacing 40.16 x 40.16 in ejector stroke 9.84 in power 230V 3 phase 60 hz approx. dimensions 424 x 109w x 105h in approx.

1998 850 Ton Cincinnati MAGNA850 Injection Molding Machine Tonnage 850 Tons Shot Size

FRP Cooling Tower, 60 Nominal Tons based on CTI design of 95/85/75/3 gallons per minute and per ton • Non-corrosive / Energy Efficient

FRP Cooling Tower, 30 Nominal Tons based on CTI design of 95/85/75/3 gallons per minute and per ton Non-corrosive / Energy Efficient - Complete stainless steel component package option available -

FRP Cooling Tower, 10 Nominal Tons based on CTI design of 95/85/75/3 gallons per minute and per ton • Non-corrosive / Energy Efficient • Complete stainless steel component package option available • Shipped completely assembled • Overall diameter: 41 3/4 in

FRP Cooling Tower, 5 Nominal Tons H Model based on CTI design of 95/85/75/3 gallons per minute and per ton Non-corrosive / Energy Efficient -

T-23-H FRP Cooling Tower, 3 Nominal Tons, Non-Corrosive, New, w/Warranty FRP Cooling Tower, 3 Nominal Tons H Model based on CTI design of 95/85/75/3 gallons per minute and per ton -

templ

(1) SAMCO Manual Tray Type Hydraulic Die Cutting Press- Used - AM16032 Series: 75Model: 1707 S00Serial: 75-03308

(1) USED 750 TON 151 OZ ENGEL MODEL: ES4400/750 WIDE PLATEN INJECTION MOLDING MACHINE MFG NEW IN 1997 SPECIFICATIONS: TONNAGE .......................750 TON SHOT SIZE .....................151 OZ (90 MM SCREW )