750 375 for sale, brand-new and used.

Terminal Board 12287006 NSN 5940-01-082-2508 NOS New, old stock. In original US Military packaging. See photos for details.

New never used, old stock, in original package as shown in pictures. Made by General Electric under Military Spesifications. it is designed for SUBMARINES.

Selling a Allen Bradley Bulletin 1336-MOD-KB005 Dynamic Brake Series D input 680-750 VDC 2.5 ADC (RMS) for Use with 380-460 VAC A.F. Drives (output) Heat Dissipation 375 Watts Max Type 1 Enclosure

2179UC7D.16 New Banner Engineering Photoelectric Emitters, Opposed 10VDC - 30VDC Power, 0 - 20 Meter Range, Part Number QS186E. Each bid quantity is for One (1) Emitter with Instructions and Mounting Hardware. You may bid / buy any number, up to the total quantity available above.

This is a RETURNED item to our warehouse. All of our returned items are repackaged and inspected to insure they are in working condition and have no missing pieces or accessories. All defects IF ANY are described below in the item description.

Arrowmax Store Welcome to Arrowmax Factory Store A Wholesale Discount Store Located in Los Angeles, California USA! Description: Ideal for professional user, this RIBless (RIB box not required) 5-in-1 programming cable is specially designed for Motorola/ICOM two-way radios. Features: The cable

Genuine U.S. Military Issue Surplus   Steel Machine Bolt - P/N: C7564 P/N: C7564 We are not sure who manufactured this part, we came up with the following.... Cooper Cameron Corp.

You are bidding on 4 (four) Socket-head Cap Screw BoltsNon-Magnetic Stainless Steel (I have 3 more bags of 4 each, if you need more of them contact me BEFORE you bid, I could revise the listing)**This auction is for a total of 4 (FOUR) bolts, as shown in the picturesMy measurements: Overall length =

16 each .375" dia x .750" round bar magnet Alnico V precision ground finnish magnetized through the "length 3/8" dia x 3/4" Alnico V Round bar precision ground finnish Note :We will custom cut cut n grind Alnico V magnet to your secifications up to 1" dia x 6"or 8" long depending in dia and small as 1/8"x 1/8" depending on material and grade. we are a Small company.... Big deals :) Also Available for $2.99 each International orders Note : Import duty / vat charges are customers’ responsibility

20 New 5/16"-18 coarse thread, thick flange, hex head nuts and 4" long studs from top Nascar team. Studs have 1.600" threads on one end and .700" threads on the other end. These are hardened grade 8 nuts and studs.

20 New 5/16"-24 fine thread thick flange hex head nuts from top Nascar team. These are hardened grade 8 nuts. The flange washer is .135 thick and .750 diameter, nut is .375 overall length, uses a 5/8" wrench.

Genuine U.S. Military Issue Surplus   Bailey Meter Co. - "Increase" Control Knob - P/N:  5314636D1   P/N:  5314636D1 This item cross-references to the following....

var itemNumber = window.ebayItemID ?

Lot of (2) Carbon Products Operation / CPO 763708X03 Graphite Electrical Brush

Solid submicron grain carbide end mill - center cutting Specific coating engineered to repel aluminum Engineered to run at 750 - 2500 SFM For high speed machining of aluminum High velocity - high metal removal rate Use properly balanced holders Holds perpendicularity

Assortment of Machine Tooling. Used 1 Radius Cutter HSS 0.375 R x 0.750 Shank (end was ground for clearance and other end of shaft was attempted to be turned down, still useable) Used 1 Roughing Endmill HSS 1.00 Diameter x 0.750 Shaft. New Chuck Arbor 0.625 Straight Shank x 33 Chuck Mount.

1.750 INCH OD.375 INCH ID.270 THICK

1" fly cutter for milling larger surfaces. This cutter is individually hand crafted in the USA to precision tolerances to accept a 1/4" HSS tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed I can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them.

3/4" fly cutter for milling larger surfaces. This cutter is individually hand crafted in the USA to precision tolerances to accept a 1/4" HSS tool, but if needed can use brazed carbide tool if you wish(note these are not always the stated tool size for brazed carbide tools, so if needed I can craft one to meet your specific needs). I will provide the fly cutter, set screws and allen wrench to fit them.