This listing is for USED 12 DS Collets and 1 DS Adapter Bore O.D. 1 1/2"and has 4 bolt holes in the flan for 10/32 screws. Collet sizes: 1'', 5/16", 11/16", 1/4", 1 1/8", 7/8", 3/16", 3/8", 9/16", 5/8", 1/2", 3/4".
Genuine U.S. Military Issue Surplus Parker-Hannifin Corporation - Hub Clamp for Rate of Flow Indicator - P/N: 626-023-001 (NOS) (NOS) = New Old Stock P/N: 626-023-001 NSN: 3040-01-263-9485 Characteristics End Item Identification: 4920-00-147-3139 Indicator, Rate Of Flow, Gull 354-010-001 This part is really small! 1/8" x 3/8" Outer Diameter 1/8" Inner Diameter There is a slot cut thru one side to the center hole.
Tractel Tirfor Griphoist TU-32 This was only used a few times and was shelved indoors. Wire rope is included and is also in very good condition with no broken stands or damage.The manual, handle and an extra shear pin are also included. Additional items also included: (x1) 7/8" clevis shackle bolt with nut (8.5 ton), (x2) forged eye bolt with shoulder 1" x 8" (8500 lb).
CRC block with five chambers Acrylic Block with Five Chambers; marked CRC Chemical Rubber Co This is an acrylic block composed of two plates, 6" long x 2.5" wide x 0.5" thick. Both plates are machined to have five recesses so that when assembled, as in the photos, there are five chambers. Each chamber has two holes drilled and tapped to a 6-32 UNC thread.
TAP AND DIE SET 1/8 TO 1/4 BRITISH STANDARD WHITWORTH- BOXED COMPLETE BSW British Standard Whitworth (BSW) is one of a number of imperial unit based screw thread standards which use the same hexagonal bolt head and nut sizes NO OF SIZE: 05 ( 1/8” TO 1/4” BSW) SIZES: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, BSW Payment Terms
Technical Specs : Item Condenser Fan Motor Motor Application HVAC/R Motor Sub Application Condenser Fan Motor Design PSC Motor Enclosure Design Totally Enclosed Air-Over HP 1/3 to 1/8 Number of Speeds 1 Nameplate RPM 825 Frame
Ross / TRW Hydraulic Roller Vane Torque Motor MAB 32 Manufacturer: Ross / TRW Part Number MAB - 32 - 2065 - A1 The MAB Series torqmotor is simple and reliable. The design requires fewer parts and has only five seals, compared to as many as fourteen in other motors. The MAB maintains speed under any pressure within its design limit.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.