8 bench vise for sale, brand-new and used.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Making the Small Shop Profitable, by John H. Van Deventer, originally published by The American Machinist, New York, NY, 1918. Re-published by Lindsay Publications, Bradley, IL, 1993.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

Milling Machines: Construction, How to Run, Tools, Typical Operations, by John T. Shuman, originally published by the American Technical Society, Chicago, Ill., 1942. Reprinted by Nation Builder Books, Mebane, NC, 2010.

var itemNumber = window.ebayItemID ?

This package sells for nearly $300 online. In very good condition. Very good versatile metal bender for small stock.

CAT 40 Tool Holder Wrench. The Cat Claw 40 is designed to enable the machinist to make tool changes without removing the CAT 40 tool holder from the CNC machine. The wrench allows the machinist to hold the spindle, while tightening or loosening "ER" style spring collet systems.

CAT 50 Tool Holder Wrench. The Cat Claw 50 is designed to enable the machinist to make tool changes without removing the CAT 50 tool holder from the CNC machine. The wrench allows the machinist to hold the spindle, while tightening or loosening "ER" style spring collet systems.

CAT 40 + CAT 50 Tool Holder Wrench. Cat Claw tools are designed to enable the machinist to make tool changes without removing the CAT tool holder from the CNC machine. The wrench allows the machinist to hold the spindle, while tightening or loosening "ER" style spring collet systems.

46 Jewelry Supply New York PROXXON 28483 Professional Rotary Tool IB/E Drill 220 volts motor with Collets. THIS IS THE HAND HELD ROTARY MOTOR TOOL ONLY (ALONE # PROXXON 28481 WITH NO ACCESSORIES) ALUMINUM D

These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.

i000000 Click to Enlarge

This sale is for ONE GROUP of SIX previously owned COPIES (original works not photocopies) of: 1) Record Tools Ltd., RECORD CATALOG E.2, (Lachine 1971) 8 pages bound in a soft cover with 9-holes punched near the spine and minor wear along the spine. Please note that there are check marks on some pages. This catalog displays images and brief descriptions for bench vices, woodworking vices, clamps, metal planes, bolt cutters, and pipe tools.

Swivel bench vise, works great, weighs about 80 pounds

Wilton Swivel Base

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

For your consideration is this Vintage Littletown Hardware & Foundry Co. Pipe Vise ... Made in the U.S.A.