8 hydraulic hose for sale, brand-new and used.

Up for sale is a lot of 64 NOS Coll-O-Crimp hose ends. These are multiple mfg's. Some have a mark that looks like a W with a line through it, some are Eaton, one is a Parker.

Pressure washer wand and hose for hot water or steam application. Wand: Made in Italy Manufacturer appears to be "A5" Model appears to be "SC5" Pressure rating: 3600psi or 250bar Temperature rating: 300F or 150C Hose side connection: 3/8" female pipe thread (permanent) with a brass male quick connect(removable). Tip (output) connection: Double O-ring connecter with brass adapters to take standard quick disconnect pressure washer tips.

AEROQUIP GH781-10 SIZE 5/8” 100R16 TWO WIRE PSI 4000 DATE OF HOSE 3Q13 (THIRD QUARTER 2013)

Item Description: You are bidding on a GATES CONNECTED HYDRAULIC HOSE 6G2 3/8" (9.5mm) R2/2SN EN853 4800 PSI (33.0 MPa) MAX WP FLAME RESISTANT USMSHA 2G-11C>NBR/NBR-PVC< Lenght: 17-18 meters / 55-59 feet. Manufacturer: Gates. Hose never been used, has been in storage, it is unused...

AEROQUIP GH493-6 SIZE 3/8” 100R12 FOUR WIRE PSI 4000 DATE OF HOSE 2Q03 (SECOND QUARTER 2003)

HOSE IS BRAND NEW, THE PACKAGE IS SEVERELY DISTRESSED . ENERPAC H7210 Hydraulic Hose, Thermoplastic, 1/4, 10 Ft ENERPAC Item Specifics Hose Inside Dia. (In.)1/4 Safety Factor4:1 TypeHigh Pressure CoverPolyurethane For Use WithEnerpac Pumps, Cylinders and Tools ItemHydraulic Hose Hose Ends3/8" (F)NPT x 3/8"(F)NPT MaterialThermoplastic Max.

Move Motor Oil With Confidence Tired of whimpy oil pumps? We've gone through 4 years of development on these pumps. Upgrades have included a custom US Made Baldor motor, viton seals to the pumpheads, scrapping troublesome pressure regulators.

AEROQUIP GH781-8 SIZE 1/2” 100R16 TWO WIRE 4500 PSI DATE OF HOSE 3Q14 (THIRD QUARTER 2014)

AEROQUIP GH781-8 SIZE 1/2” 100R16 TWO WIRE 4500 PSI DATE OF HOSE 1Q14 (FIRST QUARTER 2014)

GOODYEAR HOSE GR16SC-6 3/8” 100R16 (TWO WIRE) 5000 PSI TOTAL FEET 100’

AEROQUIP GH781-8 SIZE 1/2” 100R16 TWO WIRE PSI 4500 PSI DATE OF HOSE 4Q13 (FOURTH QUARTER 2013)

(one) Hose clamp kit , hydro-craft multi-clamp (8) slot, 1/2 " ID grommets , 11" long with hardware. We have a few of these. This kit contains only (2) of the 11" long bars.

Untitled Document

Gates 5/8 " Hydraulic Hose 3200 psi Nuts are 1" see all numbers in photos. THE NUTS ARE MARKED 10 MH THEY ARE 1" OD THE LENGHT OF HOSE IS 30" WITH A 90 DEGREE FITTING, THE FIITTING IS FLAT AND APROX. .915 OD IT IS BRAIDED AND MEGA FLAME RESISTANT.

All of this hose is included in this listing: Weatherhead H20110 Flame resistant 5/8" - 2 Pieces - 25', 2 1/2' Parker Push Lok 831-8 1/2" - 3 Pieces - 17', 20', 14' (not pictured) Dayco 7108-381 3/8" Paint fluid hose 500 PSI - 16' Boston Easy Couple H20108 1/2" 250 PSI - 4 Pieces - 3', 3', 3', 6' Weatherhead 3/4" H20112 250 PSI WP Max - 38"

Alemite B1611-B Packaged Hydraulic Fitting, 30 Degree, 29/32 OAL, 7/16" Hex, 1/8" PTF (Pack of 10) Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear.