8 inch flange for sale, brand-new and used.

This is used and in good condition. It has two ports. Both of the ports are for 1 1/2 inch tube with Varian six bolt CF flanges.

1-5/8 inch adjustable RF Directional Coupler. Fixed flange to slip connectors. Type N sample port.

SIDE MOUNT FLANGE SPEED REDUCER, PAPER CONVERTING MACHINE COMPANY PART #3984 RATIO, 5:1 INPUT HP, 2.32 @1750 RPM OUTPUT TORQUE INCH POUNDS, 371 INPUT MOTOR DIMENSIONS, FLANGE IS 4 1/8" SQUARE WITH 4 THREADED BOLT HOLES 3 1/4" CENTER TO CENTER, THE PILOT BORE IS ABOUT 3 3/4" AND THE BORE FOR THE MOTOR SHAFT IS 19 MM HOLLOW OUTPUT, 30 MM THIS SPEED REDUCER HAS NOT BEEN USED.

Features and Benefits Helical flutes are used for vertical machining center applications. Specs Series - 0 Minimum Drill Diameter (Inch) - 33/64 Maximum Drill Diameter (Inch) - 11/16

This is a used item. It is perfect functionally. The outside measurements flange to flange is 36 x 8 inches.

Performance Characteristics Port Connection (inch): 2 Hose I.D. (inch): 2 Connection Thread Size (inch): 2-1/2x12 Flange Size (inch): na Style: Female JIC 37° - Swivel

CPV 64T-3 304/SS-H095 Hose Pip Tube Railing Fitting Flange U.S. Navy Reducer 1 & 5/8 inch threaded male fitting on one end that has a small 3/4 inch female fitting on the other end. The length of this entire piece is 1 and 1/2 inches front to back.

This is a Sears/Craftsman 7 inch cut-off wheel for a portable electric circular saw. It is made of silicone carbide for masonry, block, brick, slate, and soft metals. It fits a 5/8 inch arbor minimum flange 1 1/8 inch diameter.

PN 74750 (Standard Drum, Air Clutch) SERIES 20XL Great for Wreckers, Trailers, o

Pneumatic Concrete Vibrator Cormac pneumatic air needle concrete vibrator a built-in pneumatically driven motor which has only two moving parts, the vane and rotor. Compressed air is supplied to the vibrator through the air valve and inner hose. Air flow into the rotor, passes through the passage ways in the vane, back through the "air gap" on the rotor and outer holes in the rear flange.

Pneumatic Concrete Vibrator Cormac pneumatic air needle concrete vibrator a built-in pneumatically driven motor which has only two moving parts, the vane and rotor. Compressed air is supplied to the vibrator through the air valve and inner hose. Air flow into the rotor, passes through the passage ways in the vane, back through the "air gap" on the rotor and outer holes in the rear flange.

Atlantic Equipment 845 807 8727 Davis Standard ? 6 inch flange Plastic Extrusion Die. We have nine lots of Extrusion dies and parts up on Ebay.

Atlantic Equipment 845 807 8727 Davis Standard ? 8 inch flange Plastic Extrusion Die. We have nine lots of Extrusion dies and parts up on Ebay.

Speedi-Collar SC-08 8-Inch Diameter Take Off Start Collar without Damper for Hvac Duct Work Connections Speedi-Collar is the innovative energy efficient and time saving Start Collar alternative you've been waiting for. This revolutionary start-collar features an adhesive gasket that attaches to duct board or metal trunk lines. The patented Quick-Zips tighten to create a virtually air tight seal.

Browning P1 1 3/8 5/16M Split Taper Bushing 1-3/8 Bore"

Indexable Cutting Tools - Y 3/8-27/64  SHORT T-A FLG SH STR FL DR HLDR, Spade Drills;