8 inch steel pipe for sale, brand-new and used.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

Plans to build the PowerHouse 4-Cycle Gas Engine The "PowerHouse" engine is a long stroke design for medium to low speed operation. By having a long stroke, it is capable driving a load such as a generator or pump at a leisurely pace. It is made from bar stock and was designed to be as easy to build as possible while retaining good looks.

NEW Bessey BV-DF4SB 4-Inch Industrial Bench Vise

Stainless Steel Pipe Flanges Style: Threaded Pipe Size: 1-1/2 (Inch) Outside Diameter: 5 (Inch) Material Grade: 316/316L Distance Across Bolt Hole Centers: 3-7/8 (Inch) Number of Bolt Holes: 4.000 MSC Part Number 36902534

These are commonly used for small gas appliances, but are also used for hydraulic hoses and compressor lines. The size is 3/8 inch Flare x Female Pipe Thread. I ship within 1 business.day.

A 1/2" ITT-Grinnell, CF8M cast, Stainless Steel bodied, Diaphragm Valve welded to a piping extension, with a 1-1/2" Tri-Clamp fitting attached close to the valve and with a Spraying Systems spray nozzle with a 1/8" NPT female thread attached at the far end, as pictured. The length from the Tri-Clamp fitting to the end of the Spary Nozzle is about 6-3/4". This ITT - Grinnell Diaphragm Valve and Spray Nozzle Assembly are custom welded, coming as pictured, and are in very good condition.

Machine Introduction

Machine Introduction The filling machine is our most strength equipment. It is made from stainless steel and qualified for food grade or pharmaceutical grade filling. Our different models can fill from 3-5000 ml each fill.

Hello, Up for grabs is an older Deublin 6 inch air bladder lifting chuck I put 110lbs into the bladder before listing and it held. But we all know how that may go can't guarantee the life span since it's been sitting 10 years. We have switched to 3 and 10 inch cores to conform to our newer customers and weight requirements.