8 inch wheel for sale, brand-new and used.

The C-425 Huskey electric tow tractor was designed to provide reliable service in rugged applications. The four wheel design of this vehicle ensures maximum safety without compromising maneuverability. The C-425 Huskey utilizes a 48-volt GT drive system equipped with a solid state controller and a drive train incorporating a 16.3 hp DC SEM motor attached to an automotive differential to provide rugged and reliable service for years to come.

var itemNumber = window.ebayItemID ?

3 inch Swivel Plate Hard Rubber Caster Model # 101465 Part Number: PSQ301119ZN-3H Wheel Diameter 3" Wheel Width 1-14" Plate length 4-1/8" Plate Width 3-1/8" 5/16" Holes Plate Height 3-13/16" Grey Hard Rubber Wheel No Lock These casters will ship Flat Rate Priority Mail in the U.S.A.. There will be no additional shipping on multiple purchases at the same time. International shipping will be calculated by Ebay.

SET OF (8) SHEPHERD MONOTECH 4" WHEELS MONOTECH WHEELS IS A SPECIAL MIX OF MONOPRENE THAT REJECTS ALMOST EVERY TYPE OF FLOOR DEBRIS. HAS A HIGH LOAD CAPACITY AND ALOWS SHOCK ABSORPTION & CUTIONS THE RIDE TO PROTECT YOUR EQUIPMENT ,CARGO & FLOORS WHILE REDUCING NOISE. THEY ARE RESISTANT TO MOST CHEMICALS AND OILS THREAD WIDTH 15/16" ***MADE IN THE USA*** FAST FREE "PRI

THESE ARE 4 USED #368 SWIVEL CASTORS WITH ONE LOCKING CASTOR. THE WHEELS MEASURE 2 5/8 INCHES IN DIAMETER BUT I THINK THIER CALLED 3 INCH. VERY GOOD CONDITION.

4" x 2" Medium Heavy Duty Polyurethane on Plastic Caster - Swivel (1 EA) 40 Series Medium Heavy Duty Casters Features Cold forged top late and base Double row ball bearing swivel raceway constrcution for extra strength Hardened Raceways. Zerk fitting in Swivel race for lubrication Finish: all parts except wheel are zinc plated for corrosion resistance. Legs are formed and welded to yoke base to increase strength.

4" x 2" Medium Heavy Duty Polyurethane on Plastic Caster - Rigid (1 EA) 40 Series Medium Heavy Duty Casters Features Cold forged top late and base Double row ball bearing swivel raceway constrcution for extra strength Hardened Raceways. Zerk fitting in Swivel race for lubrication Finish: all parts except wheel are zinc plated for corrosion resistance. Legs are formed and welded to yoke base to increase strength.

Up for bid is a lot of 12 NEW BLACK Swivel casters made by Rubbermaid. Each caster is approx. 1 1/2 inches in diameter and has double wheels.

4" x 2" Phenolic Sheel Caster- Rigid (2 EA), Swivel (2 EA) 40 Series Medium Heavy Duty Casters Features

4" x 2" Steel Wheel Caster - Rigid (2 EA), Swivel (2 EA) 40 Series Medium Heavy Duty Casters Features

This trio of used rubber wheel swivel casters have the same 5 by 4 inch slotted face plate. The trio have 6 inch hard rubber wheels, have the same grease fitting on the swivel and have axle grease fittings. However, the center wheel has an axle grease fitting in the axle end while the other two have fittings on the wheel.

4" x 2" Polyurethan on Plastic Caster - Rigid (2 EA), Swivel (2 EA) 40 Series Medium Heavy Duty Casters Features

Heavy duty casters in close to new condition. It seems that they have 1 3/4" by 2 7/8" bolt pattern-please see pictures. 5" wheel by 2" wide.  Two casters are swivel with brake, two stationary.

You are bitting on a set of 3 (three) Swivel Plate Caster Wheels. They are Brand New, never used. Read Specification below before Ordering.

The Lotoons Store NEW Shepherd 9484 4-Inch Rigid General Duty Soft Rubber Wheel Caster

Imperial Brass No. 123-F FLARING TOOL KIT with TUBING CUTTER for use on 3/16, 1/4, 5/16, 3/8, 1/2, 5/8 inch tubing. Tools are clean in very good working condition no wear, damage or abuse.